Mods for Avantgarde speakers

.
Duomike,

Sorry - I didn't put the butt-ugly remark in the right context.

If I listed all of the "zero-WAF-mods" I've done, it'd require several sheets of paper.

I was referring to the ability to manufacture a version that the public would buy.

It were left to me, I would have kept my mod, but dealers, reviewers and consumers visit my demo room regularly.

I never came up with anything that met marketing requirements and still scratched that itch to tweak that we have.

And they did sound good "stock", as has been documented lots of places.
.

Hornsguys,
How much further back would you recommend the Trios tweeter. I had thought about maybe building a welded stand to support each. Also in a 12.5' wide room should I move the mid/bass horns in and have the tweeter on the outside or keep the tweeters inside. I would be moving the tweeter away to clear reflections off the other horns. Maybe also fasten something like wool to the back of the horns to absorb reflections. Ideas?

Anyone replace the internal wire? If so what brand?. I am thinking of doing this. please tell me any trick because i have never open these drivers before.

.
When I was working with this concept, it was with DUOs, which have a lower crossover frequency, and also a different polarity. So I'm not sure how far back with Trios.

It'd be good if the frame you built had the provision for being able to slide the tweeter back and forth until the sound locks in.

If I was building new frames anyway, I'd seriously consider relocating all of the horns in a vertical line. Especially in a room that is width challenged.

That'll mean you'll have to to tilt the top horn down a bit.

I never heard TRIOs set up with the tweeter on the outside that sounded musically involving, no matter how large the room.
.

Hornguys,
I was thinking about a separate stand for the tweeter. The vertical array is an idea. I thought that it wouldn't work though, too close and the reflection off the backs of the other horns. I thought moving the tweeter further away, to the inside, would avoid this reflection. Also this would allow better toe in, that is not possible with the Trios frame.