48K, 96K or 192K

Oh.

Thanks for the clarification.

One question, though. If 192khz passes all info through, why have three available settings on a player? Why not simply have 192khz as the default setting?

Jwilt mentions his is an upconverting player. The 192khz setting upconverts 48khz and 96khz, does it not?

It seems some info is missing from the table (at least from my table...)

Well, the reason for limiting the output bandwidth is to account for whether or not the device receiving the output can handle it. If you send a 24/192 signal to a DAC or receiver which can only handle 24/48, the extra bits would be truncated producing a nasty sound.

Yes, he did mention that it is an upconverting player but I took his questions all to do with the digital output. Since we do not know exactly which player it is, I cannot be certain but I suspect the upconverting is available from the analog outputs and pertains, primarily, to CD sources.

Kal

02-14-06: Kr4
Well, the reason for limiting the output bandwidth is to account for whether or not the device receiving the output can handle it. If you send a 24/192 signal to a DAC or receiver which can only handle 24/48, the extra bits would be truncated producing a nasty sound.

That makes sense. Thank you.

Thanks for the responses, guys. Of course, I didn't mean the front two channels went straight into the Xda. I have an odd setup. For serious listening, I use the analogue outs (stereo "mixed" on the player) that go into a Pass Labs X1 preamp, which feeds into the Xda. For DVD, video goes to the TV via a DVI output, and the audio is passed via a toslink cable to the B&K DVD input. For DVDA, I am taking the 5.1 out of the back of the player and into the DVDA input on the B&K, which I assume is analogue as these are RCA connectors. The front two channels of everything put out by the B&K passes through a bypass input on the Pass Labs unit so that when in DVD or DVDA mode, the B&K controls volume rather than the Pass.

It sounds like I need to find out what the B&K procesor is the happiest with, and then set the output on the DVD player to match, right?

Thanks.

Jim

The machine was bought primarily for its ability to take a 480i video signal and get it up to 1080i for my TV. I was originally going to use a separate CD player for serious listening, but in the course of setting everything up, space constraints sort of dictated that I use the player for two channel as well, which eliminated a CD player and a DAC - I may at some point upgrade and reintroduce the separate machine at a later date...

The audio end of this equation is the confusing one for me - I am WAY behind on the learning curve regarding 48/96/192. I'm still not sure we have reached a consensus here - after rereading the posts, it sounds like I should set the thing to 192 and see what happens?

Jim