1. Home
  2. speakers
  3. 1337126217

'dimple' tweeter fix


Hi.I have kept my Dynaudio audience 52SE in a box for a while now. Reason, was my then 2 y.o son was beginning to be inquisitive and he poked the tweeter, hence I have BOTH tweeter with 'dimple'. I've been using my KESTREL's and kinda miss the clarity and dynamic of the 52SE..

So, anyone has an idea how to do it? how much is the parts or where can I buy them (for cheaper than dealer)? any vid around if someone already did this?

.. its an esotar 2 tweeter IIRC

Thanks
jastorg1
elizabeth
6,726 posts
 
Dome tweets can be 'sucked' back into shape with a common vacuum cleaner.
You do have to be careful as you bring the open (vacuum on) hose end up to the dome. Do NOT place it directly against the dome. Just bring the hose sucking end up toward the dome. Keep a few fingers between the flat around the dome, and the hose end. When the hose is in around a quarter inch or so away the dome will pop out and back into shape.
The crease line may still be visible, but the domes should work just fine.
I have done this a few times over the years.
The last was for my B&W 805s.
sgr's avatar
sgr
689 posts
 
Great job, Elizabeth. I could not have explained it better.
Jastorg1,
You can be sure tthis will work fine and your speakers will be restoreed to good health.
unsound
6,115 posts
 
Vacuum cleaner suction can be tricky, placed too close and the strength of the suction could displace the voice coil. I suggest getting a cardboard tube from an empty paper towel roll, placing one end over the dimpled driver, and placing your lips inside the other end, and then gently suck. Works like a charm most of the time.
More to discover