how make your speker faster

Isn't that part of the typical frequency response measurement?

Back to the original question:

speakers AYON DRAGON-S
How i can make that speaker a little "faster" or more dynamic ?
Does some sort of spikes will help to move the sound in the direction of faster ?
Are any other method maybe help here like the vertical angle of the speaker?
An experiences or suggestions ?

Well, once again we have an OP who poses a question with far-reaching ramifications with a minimum of information on salient factors, which touches off a flurry of responses touting a wide variety of suggestions, theories, and solutions with no further response or clarification from the OP.

And I was so eager to dispense my brand of "wisdom" that I didn't even notice the speakers in question: Ayon Dragon-S, a 132-lb full-range floorstander with a ring radiator tweeter with response out to 40K, claimed sensitivity of 94.5dB, and a retail price around $36K/pair. Yet the OP wants more speed and dynamics? One would think you'd get that for $36K, especially with that treble extension and sensitivity.

So at this point unless the Ayon Dragon-S is an overpriced dog (which I doubt), then it seems that just about everything else must be wrong with this setup--room size, speaker positioning, speaker platforming (or spiking or whatever), cabling, electronics, room treatments, you-name it.

The thing is, the OP posed this scenario and walked away, leaving us to vainly chase our tails. I'm not playing anymore unless the OP returns and clarifies.

For example, since human frequency response disappears at around 20 Khz, many think that any engineering to widen the bandwidth out to 100-150 Khz is an unnecessary expense.

In my case, I do hear, or at least am aware of frequencies above 20 kHz. I can't tolerate the resonance of a metal dome tweeter. That usually seems to happen above that 20 kHz limit used. I've had to leave a room at audio demonstrations on numerous occasions. They all had metal dome tweeters, when I found out afterward.