Stillpoints Ultra SS under your speakers?


Hi,

I'd like to hear anyone's experiences with replacing their speaker spikes with the Stillpoint Ultra SS isolation/vibration control devices. I did a search and found a few related threads, but I would like to hear more. I want to try them under my Merlin VSM-M's, and yes I know Bobby will strongly disapprove...
BTW, if it matters, my speakers are on a carpeted suspended wood floor.
Thanks!
heymikey
Tbg, I've become a believer in Stillpoints and agree with your comments regarding the Ultra 5's. I recently ordered a pair of Magico S5's and plan to use a set of 3 Ultra 5's with the Ultra bases under each speaker, and plan to buy 2 more sets of 4 Ultra SS to go under my amps. And when I upgrade my source next year, I plan to use a set of 4 Ultra 5's in that application.
Melbguy1, buy two more SP Ultra Fives and compare four of them with three of them. One warning is be certain that all four are in contact between the speakers and the floor. You will keep eight rather than six. Yes, five are even better. Incidentally, this is true also of all components, at least in my experience and yes including the need to make certain that all four are in contact.
Tbg, what you're describing might be true, though the Magico S5's have 3 factory spikes on each speaker, so to replace the factory feet using the short thread adaptors from Stillpoints, you only need 2 pairs of 3. Imho, running 3 Ultra 5's with the Ultra bases is more than enough isolation. With the Ultra bases they are already more effective than the standard Ultra 5's, and way more effective than the factory spikes/cups. You can go silly on this hobby. A wise person once told me your system has to be balanced.
Melbguy1, the Stillpoint ultra base add nothing to the performance of the Ultras other than height adjustment. One thing that I have learned is that there is no such thing as too much isolation with StillPoints products. I know a guy with 92 Ultra Fives. Having tried Ultra Fives under Ultra SSs with a big improvement and using Ultra Fives under amps and then used them mounted on StillPoints Component Stands, thus gaining additional four of the "technology" feet, etc. I have given up saying enough is enough. Try an Ultra Five on top a component.

I guess everything depends on what "balanced" means, but I doubt given any operationalization of balanced that I can think of, that is a true statement.

It is too bad that Magico does provide more anchor points. You could just put two in the corners in the back.
Tbg, thanks for the feedback re: the Ultra bases. I've read feedback to the contrary indicating they provide a slight lift in performance, so results obviously vary depending on the application. On a tiled floor, using the the bases is probably a good idea in any case to provide height adjustment.

I think you missed my point about keeping your system balanced. By that I meant, there is no point owning 92 Ultra 5's, and running a Yamaha integrated amp or $200 speaker cables if you know what I mean. I certainly don't have the cash for 92 stillpoints. The Ultra 5's make the most difference under your speakers, and as I mentioned they are far superior to the factory feet, so 2 sets of 3 is all I would need save unless I changed my speakers to Genesis 1.2's and upgraded to Gryphon Memphisto mono blocks. You can go silly on this hobby, and i'm not pre-disposed to such folly.