1. Home
  2. digital
  3. 1204156749

Should I match powercords

I hope this isn't too dumb, but is it important to use the same/similar power cords with a cdp and its power supply? I have a Modwright 9100ES and am currently running an old (pre Helix) Shunyata Python VX into the power supply. Would I be best advised to buy another Python or should I just get the best PC I can afford for the cdp? Both will be plugged into a Walker Velocitor with a Silent Source PC running to the wall outlet. I'm also concerned about mixing different AC treatments - Power supply Bybee filters, Shunyata VX material, and Velocitor whatever it uses. I'll gratefully receive any well intentioned advice or suggestions.
phaelon
avguygeorge
2,300 posts
 
I like Blindjim's theory.---I would guess just about all cable makers or sellers might rec. you should use/buy their cables in every iec-'hole'. But somehow I think that's just salesmenship.
tvad
9,467 posts
 
The Purist Audio Dominus Ferrox is the best power cord presently available that I have heard for the Modwright tube power supply. It creates outstanding deep and controlled bass.

Using another Ferrox on the Sony player is too much of a good thing in the highs and upper mids (but not bad by any stretch). A Dominus Fluid is nicely complimentary.

My experience has been that the Dominus Ferrox used on the power supply mates well with many other cords used on the player.

So, IMO, it is not necessary to match power cords on the Modwright, and it's often beneficial to mix them.
phaelon OP
1,038 posts
 
Thank you everybody. My system is already sounding a little soft so I'm sure you're right Blindjim, another VX would be too much. Thanks for the heads-up on the Dominus Ferrox Tvad, I'll look into them.

Regards
More to discover