Tweaks for EMM CDSA SE ... ?

Flashunlock, thanks very much for this link. Very informative. I have a question. I live in a country where there is no ground in domestic wiring. So I imagine getting a Tara wire with the Ground Station would be a waste of money. I'm not in the market for any new wiring at the moment but if I were to consider buying a new interconnect in the future -- Tara or another brand -- is there one you might recommend that does not require buying a Ground Station or other similar device?

Sabai,

The HFX grounding from Tara Labs has nothing to do with the mains. The interconnects each gets grounded to the HFX which is supplied with the cables.

The other best interconnects I've used before the Zero gold is the Virtual Dynamics Genesis 1.1. Check out the sales section.

Flashunlock, thanks for letting me know. I'll check this out.

Flashunlock, the Furutech T2A green fuse is now installed in my EMM and I must say the improved clarity is quite amazing right off the bat even with no power conditioner at the moment. Thank you for the hot tip. I have disposed of my old power conditioner and will listen to the system without my new SR PowerCell 10SE for a few days to let the fuse settle in. I will connect the PowerCell in a few days and am looking forward to hearing the results.

Sabai,

You're welcome. The fuse needs at least 100 hrs of break in and you will hear the changes in between. Do turn the fuse the other way round and try after break in even though they are not directional but you will find and know which position you prefer. :)

If you really want to go further, buy some furutech Nano fluid and do the fuse caps and ready to be shocked again. i've used up nearly a whole bottle doing all my connections.

I also use the SR Powercell 10-SE to great effect with the CDSA-SE. The more of the powercell sockets you use up, the better it sounds and make sure you seperate digital to the power amps combating cross talk. Plug the power amps AC cables nearest to the 32A precision cable from the 10-SE.

What AC cable are you using with the Emm's as getting the power right makes a big difference to it.

Hope this helps and enjoy the music.