Parasound C/BD 2000 Belt Drive CD Transport

Thank you Rockitman,

I had thought the same thing but was not certain. Thanks much.

bob

Realremo, According to DIYHIFI which many do use to purchase parts, etc, and are the home of Lady Day 300b and many other components both kits and factory built sell ready made (75 ohm digital) cable in 2 lengths only 12 inch and 5 meter which are claimed to be the correct lengths. I actually probably had read something somewhere about cable length for digital signal so thought I would order the 12". It actually does seem to make a difference and I have a nice close proximity with transport and dac. Although the 12" is $59 and the 5 meter is $79--not much of a price break for going with foot length. And they are indicating 5 meter not 5 foot-- but you must have heard the 5 somewhere. I am not a cable freak by any means. The only other cable I paid just over 200 for is Kimber Kable speaker wire. Always wanted to try it.

Skiroe, the 1.5m recommendation is a minimum length to avoid possible jitter that the cable itself can add to the signal if it is shorter than 1.5m, there have been many posts and white papers written on this subject, if you do some searches in the audiogon forums you will find plenty of opinions regarding this. I use a 3m Kimber USB cable that is a blend of copper and silver, and the coax that I have is a 1.5m wireworld, also a blend of silver/copper. Total for both was less than $160. Have not compared the sound to cables shorter than 1.5m, so I guess I cannot definitively say that the 1.5m minimum is valid, I am just trusting the opinions of engineers and DAC designers.

Skiroe, check this article out:
http://www.positive-feedback.com/Issue14/spdif.htm
This is an interview with a well-respected DAC and USB conveter designer that covers the subject...