Record-playing Rituals?


I'm curious what everybody's riuals are when listening to albums. How often do you clean the records? Every Time? How often do you clean and lubricate the stylus? Every time?

David
deshapiro
I use a VPI 16.5 and initial cleaning is with diluted solution from UHF concentrate (available from UHF magazine here) with the VPI supplied brush. This has sufficient detergent that no beading is seen. After vacuuming, a second wash with isopropanol, vacuuming, and then a generous rinse with distilled water and a NittyGritty brush and a third vacuum. GruvGlide is always applied, and the disk played straight away before inserting in a new sleeve. The sleeve is marked to show the record has been cleaned and treated with GruvGlide. I do use a second cork mat for the second side of each disk to avoid putting the clean side on a contaminated mat. Every few days I clean my brushes and the vacuum wand. Intermittently I clean the stylus with Last and a Benz Micro stylus brush. I also use a Zerostat and a Goldring Super Exstatic brush on the glass platter before playing. Once a disk has been cleaned like this, I may use the Goldring brush on it prior to playing if I can see anything on it, otherwise it gets played for a while before being cleaned again.
Jhendrixfan : Thank you for your support in the cause of steaming records.

Steaming LPs is one of the most cost effective and repeatable playback improvements available to any Lp'er. Used as a part of of combo with a record cleaning machine the results can be fantastic. There is a "dirty little secret" in the record cleaning industry, namely ALL record cleaning fluids leave a sonic fingerprint, goos an glides even worse. However, since so few have ever listened to a steamed cleaned recording they truly have no idea what they are missing.
My personal choice is the Perfect Hand Steamer available thru Walgreens Web Site for $30 US. Great machine ! As for super pure water , try Peak Battery Water @ Pep Boys $4.Ga.

I feel that Pidepipers suggestion to preclean using warm tapwater in certianly acceptable for dirty, grungy $1 bin stuff , provided that steaming comes into play sometime in the mix.

Remember : Jimi played a right-handed guitar up-sidedown and left-handed. He broke most conventional guitar playing rules ... 30 years since his death his music can be heard almost anywhere a radio signal can be received on this planet. Long live Jimi.
Crem1,

"I feel that Pidepipers suggestion to preclean using warm tapwater in certianly acceptable for dirty, grungy $1 bin stuff , provided that steaming comes into play sometime in the mix."

precicely, or at least a cleaning system worthy of the stereo system and record.
According to my review of record cleaning articles in print and the internet , the dousing of LPs with water has been recommended in one form or another ; as has the use of a cleaning solution(s) , lite scrubbing , a second imersion of the LPs groves ( not label) and then a drying , by air or cloth. This record cleaning method has been practiced by lots of institutions and folks like us.

What I observed was that even the addition of a Record Cleaning Machine (RCM) did not drastically improve the playback experience. Of course, certian fluids and certian RCM's made some difference , but on high resolution systems backround noises persisted. I became so curious that I began to use high-powered magnification to observe the before and after of record cleaning. Frankly, I was amazed to see first-hand the amount of stuff (mold & grime) that resisted all cleaning.I also came of the opinion that no cleaning method did much to remove grunge locked in the deepest portions of the groves.

In the 1990's I stumbled upon hand held steam cleaners that became the rage on late night info-adds in the US.

The steam cleaner's appeal to me was as a potental record cleaning device. I presumed , if it can clean the grime off the family john , auto or grill why not LPs ? So began a decade and 1/2 long experimentation with hand held steamers .

The Steam Advantage is specifically the "blast" of steam from these hand held units aids in dislodging all sorts of alien crap that interfears with the playback of LPs. Presuming the LP is free of manufacturing defects and signs of owner abuse , the finished product will be relatively cleaner , therefore; more of what has been transfered to the LPs groves shall be available to the listener's ear. I recommend that LPs be pre-cleaned with steam , scrubbed on a RCM of choice w/ cleaners of choice , lightly steamed and run on a RCM then dryed. Why the post steaming ? My experience is that ALL cleaning fluids and tap water leave a "sonic fingerprint" . The second steam aids in reducing or eliminating that print, so it is no longer a problem . Using garmet steamers subjects the LP to a "hoter" steam and the possibility of damage. To date, none of my Lps has been the steaming process I use but be forewarned , practice safety and take your chances.

So there you have it . This process is time-consuming but for the bomb of kilo-bucks spent on analog, cheapo steaming can improve playback lots more than Mo' Money.