Phono stage picking up radio signals?

Neil, great explanation of "shotgun" topology, and the purpose of the "arrowhead". Most people I know think the arrowhead indicates the directionality of interconnects caused by the grainular structure of the conductor. You have cleared it up.

Zargon, thank you. There are some cable manufacturers who, especially in their speaker cables (which aren't ever "ground shielded",) orient their arrow direction based on "wire draw." Which simply means the direction the wire was pulled through the dies during manufacture. Supposedly, the orientation of the metal crystals as a result of the drawing process makes it easier for the electrons to flow in one direction than the other.

Others who produce spkr. cables and IC's which are symmetrical as far as orientation goes, often include arrow
indications so that (according to them anyway) you'll be able to orient the cables in the same direction, should you have to remove and re-install them after they've been broken in. Personally, I think it's just a "me too" marketing ploy.

I received an email response from James Henriot. It seems there is a modification for the Whest PS .20 for areas with high RF. The modification is now standard on new models of the phono stage sold in the US and Canada. James Henriot from Whest and Bob Leitz at the Analog Shop, where the unit was purchased, have been tremendously helpful and Bob is very much interested in making me a satisfied customer, even though this unit was technically purchased used. I also appreciate all the responses here on this thread, especially Neil who surmised the problem may actually be in the phono stage itself. I've learned a lot here about the various types of noise that can creep into a system.

I'll need to send the unit off, most likely to Mitch Singerman who services these in CA (close to me at least), but I'll post a follow-up when it gets back to me. I'm also going to wait on the cables until it does come back.