Only the great Oz can answer your question. We're off to see the wizard...
Lions and Tigers and Bears..Oh MY............or...
Pre-amps and Turntables and arms.....OH MY!!!!!! Pardon the excitment but I wanted to get your attention.
After the new year I may be in a position to upgrade my system if need be.
As you can see below my system is listed.
I am very happy with my speakers (the Infinity RS 1-B's) and if I wanted to upgrade to a better speaker today, then I believe I would need to go in the 20-30K range. Besides, as I said, my speakers satisfy me immensely!
Where I might want to upgrade is at the analog/Pre-amp department. I am quite happy with my Rhea phono section and unless someone says that I am crazy and should sell it for a Manley Steelhead or Lamm LP2 or other, I'm staying put. With that said, here are my two choices: upgrade my ARC LS25 MK1 to an Aesthetix Calypso pre amp OR upgrade my analog turntable/arm/etc.??
My choice is easy for the pre-amp upgrade but much more difficult for the table/arm. Here's why....my current turntable is a VPI Aries mk1 with 10.5 arm. I know the company and I am very happy with their service and support. I could go with a VPI HR-X with a 12.5 (6??) and use my SDS (which I already have) and save some bucks. I also like the idea of VTA on the fly. It's easy with the 10.5 and 12.5. I also love the ability to switch arm wands instantly!! Now the drawbacks....recently and in these pages as well there is not a great deal of high regard for the HR-X and especially the 10.5/12.5 arm. So my thoughts are flirting with an SME 20/2, Basis (not sure which one) Teres (260???) , Simon Yorke(????) or Brinkman. Here are the drawbacks. All are more expensive, except the Teres which I understand is a do it yourself table and you are looking at the worlds biggest non-techo person around!!!! I am all thumbs!!!
But I would like your thought on the table. In addition to the table s the arm. Here is where it gets a bit confusing. I have heard so many comments about the Schroder (I would probably go for a model 1...the second in the line). Perhaps, a Tri-planar, or SME or the great Graham Phantom or 2.2 arm??? Which on do you think is sonically satisfying and yet also easy to use and set up. For instance: does the Schroder or Tri-Planar or Graham have VTA on the fly?
Another though is to purchase the VPI HR-X (if I go that route rather then the Pre-amp Calypso upgrade) and install another arm rather then the VPI 12.5??? I believe some folks have done this. I ask...why? What was the benefit?
Alas.....I leave this long winded question for you to moll over and reply with your thought, suggestions and comments!
Thanks again for your time!
P.S. Manufactures/dealers/'Goners..please all reply.
After the new year I may be in a position to upgrade my system if need be.
As you can see below my system is listed.
I am very happy with my speakers (the Infinity RS 1-B's) and if I wanted to upgrade to a better speaker today, then I believe I would need to go in the 20-30K range. Besides, as I said, my speakers satisfy me immensely!
Where I might want to upgrade is at the analog/Pre-amp department. I am quite happy with my Rhea phono section and unless someone says that I am crazy and should sell it for a Manley Steelhead or Lamm LP2 or other, I'm staying put. With that said, here are my two choices: upgrade my ARC LS25 MK1 to an Aesthetix Calypso pre amp OR upgrade my analog turntable/arm/etc.??
My choice is easy for the pre-amp upgrade but much more difficult for the table/arm. Here's why....my current turntable is a VPI Aries mk1 with 10.5 arm. I know the company and I am very happy with their service and support. I could go with a VPI HR-X with a 12.5 (6??) and use my SDS (which I already have) and save some bucks. I also like the idea of VTA on the fly. It's easy with the 10.5 and 12.5. I also love the ability to switch arm wands instantly!! Now the drawbacks....recently and in these pages as well there is not a great deal of high regard for the HR-X and especially the 10.5/12.5 arm. So my thoughts are flirting with an SME 20/2, Basis (not sure which one) Teres (260???) , Simon Yorke(????) or Brinkman. Here are the drawbacks. All are more expensive, except the Teres which I understand is a do it yourself table and you are looking at the worlds biggest non-techo person around!!!! I am all thumbs!!!
But I would like your thought on the table. In addition to the table s the arm. Here is where it gets a bit confusing. I have heard so many comments about the Schroder (I would probably go for a model 1...the second in the line). Perhaps, a Tri-planar, or SME or the great Graham Phantom or 2.2 arm??? Which on do you think is sonically satisfying and yet also easy to use and set up. For instance: does the Schroder or Tri-Planar or Graham have VTA on the fly?
Another though is to purchase the VPI HR-X (if I go that route rather then the Pre-amp Calypso upgrade) and install another arm rather then the VPI 12.5??? I believe some folks have done this. I ask...why? What was the benefit?
Alas.....I leave this long winded question for you to moll over and reply with your thought, suggestions and comments!
Thanks again for your time!
P.S. Manufactures/dealers/'Goners..please all reply.
- ...
- 10 posts total
- 10 posts total