Linear Tracking Turntables

You haven't heard anything until you hear one of these tonearms like the ET2 or the other air bearing tonearms out there. I think there is one called the MG-1 and it goes around $500. You can find a Technics SP-10, SP15, or SP25 if you don't want to spend big bucks put the air bearing with one of these tables and you will have a very nice sound table and would be far better than the Yamaha you had which is a nice sounding table. The only drawn back is the initial setup of the Air bearing tonearms (you need patience for this) but once its setup and balanced correctly on a firm table stand you wont have to mess with again for a while, only to do regular fine tuning that you would do normally with any table. Just something to consider.

Steve.

ET2 and don't look back!!!!

My experience is with the LT 5-V.The thinking is right but the execution was mediocre with todays standards.If you have the skills and money and time to go for it,it can rock your world.Change the cable to silver from head to rca
throw away the flexing feet and replace with solid 3cm thick mdf and take the motor with a longer belt and power supply outside the turntable and finally do a little damping of the chassis and you 're there!

Sony PS-X800. Not only Linear tracking but "Biotracer" vertical servo as well. Good luck finding one!

Hello
There is a person in England who might be able to fix your
PX3 turntable. If you are interested than i could give you his number.He fixed my PX2 and PX3.
Thank you.