2. analog
  3. 1140727350

Ideal TT & Arm for the following top cartridges...

Koetsu RS Platinum
Van Den Hul Colibri XGW
Miyabi/47 Labs
Allaerts MC2 Finish

So the search is on. I agree with a colleague's comment that although it is convenient for AB'ing cartridges, my VPI extended Aries (ver. 1, no flywheel, no SDS) with a 12.6 bearing assembly and JMW 12.5 and two 12.6 armwands does not fully show the potential of these cartridges. Certainly I can upgrade to the Aries 3 and add the flywheel and SDS or step up to the TNT line, but considering the performance level of these cartirdges, I do not want to overlook something else.

The Allaerts is enroute so I cannot comment on it yet. But I really like the RSP and Miyabi (the RSP being more refined overall) vs. the VDH for now. It could be a loading issue (now at 250 Ohms) but the VDH, although fast, transparent, detailed and dimensional, it is also lean and uninvolving (I hear the VDH platinum option can address this).

So I would appreciate your recommendations on a TT and Arm combo in the $5k-10k range as used/demo demo pieces that are capable of showcasing the performance potential of these fine cartridges. Feel free to make a single recommendation (arm or TT only) or synergistic combination.

The rest of the system includes the Ear 88pb phono stage, a modded Electron Images MCP-1 and trying a friend's Whest PS 2.0 for kicks (a Wavestream Kinetics phonostage is coming), Bent TX103 step up as needed, First Sound Paramount Mk II pre, Dehavilland Aries 845G monoblocks (NOS tubed), highly modded Coincident Milleniums.

TIA & best regards!
ctm_cra
Ag insider logo xs@2x
rauliruegas
9,123 posts
 
Dear Ctm: For the KRSP: Lustre GST 801 or Ikeda 407.

Allaerts MC 2 Finish: Ikeda 407.
Colibri: Sumiko MDC 800 or Brinkman.
Myabi 47: SME IV ( rewired )

XV-1: Lustre GST 801, SME IV and Ikeda 407.

Those ones are my experiences about.

For turntables I recomended any all metal design like: Galibier, Acoustic Signature, Micro Seiki, Avid, Verdier, etc. etc.

Regards and enjoy the music.
Raul.
ctm_cra OP
86 posts
 
Raul - Thanks for the detailed and varied response. I know this may be a longshot, but please keep me in mind if you ever want to part with one of your GST 801s or AS tt.

I invite others to add to the above suggestions. Thanks in advance.
vincentkkho
53 posts
 
I have both RSP and 47labMiyabi. Triplanar7 so far is the best match for Miyabi. With this combination, all-out-assault to use ASR exclusive Basis phonostage with Nordost Valhalla interconnect to the preamp. It is so far the best sounding in my system.
ctm_cra OP
86 posts
 
Nsgarch - Just curious what cartridge have you found to work best with the Tri-Planar?

Vincentkkho - Thanks for responding. Please tell us what tt you are using?

Raul - Please detail if you have any experience with the Tri-Planar. If so, was it in your system and what cartridge was used? Does its performance reach the level of those you recommended above?
Ag insider logo xs@2x
rauliruegas
9,123 posts
 
Dear Ctm: I have experienced the Triplanar but never in my audio system .

I have a very good idea about the VII due to my " in other systems " experience and to the opinion of one person that I respect a lot ( an Auiogoner ) who thinks that the MAX 282 is on the same league than the VII. This is an " elogio " ( achievement ) for the VII. Btw, this tonearm is not exactly my cup of tea, between other things: I don't like " unfinished " products, this one goes in its seven up date and counting: maybe I will buy it when it goes in the 11 stage: it will be a better one than today, don't you think?

Now, more important and a critical issue about the quality of the analog music reproduction is the Phonopreamp specially with all those top performance cartridges: the MC2 Finish ask for the best of the best : no exeption here, so take cere about the Phonopreamp.

Regards and enjoy the music.
Raul.
More to discover