Dear Rnm4, You are quite correct; the idler wheel should never contact the edge of the cut-out in the chassis. Further, scraping against the edge may indeed have damaged the rubber gasket that rides on the edge of the wheel. But in passing, another possible source of scraping noise could be the brake system. If the piece of metal that constitutes the brake is touching the platter, that could account for the "other" scraping noise that you hear when you only partially engage the ON switch, so as to avoid the noise due to the scraping idler wheel. Some people just remove the brake entirely. Anyway, it seems as though your table needs some surgery. If someone else built your plinth and installed the table, you might want to take it back. Otherwise, you need to adjust your idler arm and possibly to replace the rubber too. Go to Lenco Lovers website for help on those two things.
Building high-end 'tables cheap at Home Despot II
“For those who want the moon but can't afford it or those who can afford it but like to have fun and work with their hands, I'm willing to give out a recipe for a true high-end 'table which is easy to do, and fun to make as sky's the limit on design/creativity! The cost of materials, including 'table, is roughly $200 (depending, more or less), and add to that a Rega tonearm. The results are astonishing. I'll even tell/show you how to make chipboard look like marble and fool and impress all your friends. If there's interest I'll get on with this project, if not, I'll just continue making them in my basement. The next one I make will have a Corian top and have a zebra stripe pattern! Fun! Any takers?”
The Lead in “Da Thread” as posted by Johnnantais - 2-01-04
Let the saga continue. Sail on, oh ships of Lenco!
The Lead in “Da Thread” as posted by Johnnantais - 2-01-04
Let the saga continue. Sail on, oh ships of Lenco!
- ...
- 1096 posts total
- 1096 posts total