tonearm match ZYX Universe Moerch and Triplanar

Doug,

It is a Universe Copper.

Hi Tom,

I think I mentioned this to you before but I'll say it again here. The Gavia will sound its best if siting on something like granite or aluminum. I don't think the Nuance would be a good match in this case and I'm having nightmares for you over the wall mount and the Gavia's weight.

You could try a light weight, rigid table. An end table for example. Just put a granite or aluminum slab between the table and the base of the Gavia. And don't use the cones.

Dan - you mentioned not to use the cones etc

thanks for the wake up call
I guess I never factored in 120+ lbs for the Galibier

won't the granite ring a little?

I have a nice granite slab on my target rack but will need a larger one (I buy left over slabs from local countertop sources - they have some great italian red granite that makes this geologist envious)

just a plain table? no audiophile stand?

Tom,

I'd guess most Galibier users site the table on a floor stand, especially if you have the added benefit of sitting on a concrete floor. From there, I'd say the field is open - Thom favors building a sandbox with an aluminum top plate that beds into the sand by virtue of some interface between the top plate and sand; several other users have successfully utilized granite or other such stone materials. General consensus from most users is that wood (be it MDF, solid maple or other) is not an ideal top plate material. This is a case where experimentation is in order - the path to an inert surface is frought with variables, including the type of floor and stand construction. You should carefully read over the Galibier FAQ page to get a better idea of the types of surface materials available, as well as strategies for finding the best stand for your situation. -Richard

Yes, the granite will ring. I'm betting that the aluminum does also but at a different frequency. As Richard mentioned Thom's preference, I'm also using the granite with a sandbox. My suggestion for the end table was meant as a temporary solution until you get else. Maybe one of those high dollar stands will be a great solution. But if not you're out some money. As Richard suggests, experimentation will help you find a good solution for your situation. Thom has told me of one of his customers who has been using such a table for some time now with very good results. I don't know what that person is using as a plate under the base. I had first tried a butcher block shelf cut so that the bottom had sections that would sink into the sand. Really bad. I didn't realize how bad it was until I tried the granite. BTW, I did the same. I bought a remnant, Dakota Mahogany, from a local stone supplier and had them cut it to the same dimensions as the wood shelf so it was a drop in replacement. Someday when a get some extra tweaking money I'll look into an aluminum plate to try in comparison with the granite.