1. Home
  2. analog
  3. 1204584949

Got a New CD Player and Now I'm Bummed

Hope to get some help here...I recently added an Esoteric X-03SE to my system the details of which you can see here. I've always been a huge fan of vinyl and have a large collection--many more LP's than CD's. The problem is my digital front end is now WAY better sounding than my analogue set up. (My last CD player, a Naim CDX2, was about on par with my table--better in some areas, not as good in others). I'm finding myself listening to many more CD's while my LP's are dying for attention. I never thought this would happen to me! So, now I'm faced with upgrading my analogue to the point of parity (or better?) with my digital. (Wierd, right?). I could use some suggestions. One limiting factor is the overall height of the new analogue set up cannot be much taller than what I have since it needs to sit on a wall mount shelf that fits inside our entertainment center. So, I need a table/arm/cartridge set up that sounds DRAMATICALLY better than my Scout/JMW9/Dyna 20XM but doesn't need a ton of head room. What do you think I need to spend to get significantly better performance than what I have already? What would you all suggest for a new analogue front end? I'm thinking a Scoutmaster, Sota Cosmos or perhaps going back to an LP 12 with works. Ideas? Thanks!
dodgealum
glory's avatar
glory
1,373 posts
 
Sell the CDP and move up in your vinyl setup. =8^)

Ejlif has some wisdom here. Dyna XV - 1S and a EAR 324 or one of the better Phono amps will do the trick.

Liste to Restock as he also has wisdom.
cytocycle
1,034 posts
 
Sorry to go the other direction but upgrade your preamp, my friend upgraded to an ARC LS25 from your SP16 and it was a huge upgrade in soundstaging depth and width; and, then get a good phonostage.
If you change tables, your phonostage will still really be holding you back. You could get a Dynavector phonostage P75 Mk1 or Mk2 and use the Dynavector enhanced mode with your cart which should elevate your system quite a bit for very little money and space. I have heard good things about the EAR phonostage suggested also.
dopogue
1,767 posts
 
The very first thing I'd do is get a VPI SDS power line/speed controller for the Scout.

No offense, but I wouldn't play my vinyl much if I had to reach that high to change a disc. You must be pretty tall :-)
rhljazz
1,117 posts
 
I agree with Cytocycle concerning a preamp/phono stage upgrade. I recently had to have repairs done to my VAC preamp and I auditioned an SP16 (didn't like it) and a Manley (no phono) which was far superior to the SP16. I purchased the Manley to use while the VAC was away. My backup phono stage is a Phomonena which I used with the Manley. I don't have an audiophile approved turntable but it works and sounds just fine for me. When the VAC was away for repair they performed a mod to the phono stage that is remarkable to say the least. Prior to repair, for the most part, the cd system sounded better. Now the LP playback kicks out some serious dynamic and detailed music that beats the cd system.
In the least, if you are married to the SP16, try a quality outboard phono stage. Your turntable is superior to what I'm using and I think you would be astounded by what a real good phono stage would do.
paulfolbrecht
586 posts
 
I'm probably going to get spanked for this but I'm going to offer an opinion. I've found that systems with mid-efficiency multi-way, crossovered speakers, digital and analog generally sound closer than they do on systems I prefer - low-power SET and single-driver horns or front horns.

I recently tried to go all digital. On my system, with a Shindo pre, Yamamoto or Art Audio amp and Lamhorns, no digital comes very close to analog. Digital can sound good, but the level of nuance, realism, and envelopment is in another league with vinyl. It's nothing subtle

Is it more revealing, or just different - somehow tailored to vinyl?
More to discover