1. Home
  2. analog
  3. 1204087493

Technics SL1200MK2 Cartridge Discussion

Hi,

I'd like to have a thread on cartridges that work with the Technics SL1200MK series tables.

I want to buy a Technics SL1210MK2 (the new black version from Musicians Friend) and need a cartridge recommendation. I am using a Musical Fidelity A308CR preamp that has MM/MC capability. My amps are Bryston 7B ST's and I have a pair of B&W Signature 800's on the way to replace my N801's. The MF Preamp is rolled off on top and the system is very listenable for long lengths of time. I'd describe it as detailed, but not too bright.

I really want to try the Technics table as it is relaible and inexpensive ($400 shipped or less for a used table if I go the ebay route). Please do not try to talk me into a different table. I had a VPI Scout and Dynavector 20x (High output) that I sold because I just wasn't using it. I'd like to keep this cheap so that I have decent TT available when and if I want to use it.

What can you recommed for a cart? I'd like to keep $160 to $200 as a max and stay lower if possible. Here is what I am considering:

Denon 103 (not the R)
Denon 110
Denon 160

Audio Technica 440 MLa

Shure M97xe

I do not know what carts work well with the Technics tonearm. I know that it is light and some threads recommend a Sumiko headshell for the Denons. What do I need to know here before buying a table and cart.

Thanks.
tigerwoodkhorns
cytocycle
1,034 posts
 
Spraglow: if you aren't going to rewire the stock arm, spend the extra and get the 1210 M5G which has OCF copper cabling in the tonearm plus it's the best looking.

I liked the performance of my 1210 M5G and how amazingly easy it was to setup and maintain, but sold it to a friend, he later put the KAB fluid Damper on and Mapleshade brass footers on a 4" maple block and that completely transformed the table... plus I bet the tonearm cable broke in.
johnnyb53
3,490 posts
 
For $400, the SL1210 Mk2 available at Musicians Friend is a no-brainer. However, if you can get a good price on a 1210 M5G (I got mine for $500), it's worth it for the upgraded tonearm wire. The rest of the upgrades on the M5G have no audiophile applications.

OTOH, a KAB tonearm rewire is $169.00, which would be better wire yet (e.g., Cardas) than the improved wire on the M5G.
gutooosh
11 posts
 
KAB recommends the MK5...
les_creative_edge
170 posts
 
Spraglow,

The 1200 and 1210Mk5 are basically the same. The 120o is silver the 1210 is black (charcoal) with a space for an extra head shell. The 1210M5G has factory upgraded tonearm cables and more features suited for DJing or scratch along with a glossy finish. If you want the best one out of the box the 1210M5G may be your choice because of its better factory wiring. But KAB can upgrade for you the others with Cardas wire, it just takes a little while longer to get the unit delivered.

I chose the 1200MkII because I like the silver over the charcoal. The high gloss M5G interested me but it has added LEDS and other features I just did not need so I went with the more simple looking 1200MKII with Cardas rewiring. It will be hear anytime now, bu you have to be more patient as the mods and testing done by KAB takes added time.

I am looking forward to getting it putting on my Denon DL-110 cartridge. Down the road I'll probably buy the KAB arm damper. and maybe better feet for it.
edo_musica
113 posts
 
RE: which TT version.... I went with the SL1210 Mk5 and KAB tonearm rewire.

Sharpe,
What headshell are you using with your AT150mlx cart? ( I am using stock....and have no qualms)
More to discover