2. analog
  3. 1214065860

Feickert analogue protractor....Owners impressions

I'm contemplating the purchase of this brand of protractor.

Over the years I have relied on a good friend to mount cartridges and set up the few tables that I have owned in the past.
Relying on someone else to do this was for good reason.

I would never make it as a watch maker or any other profession that requires a fine touch and skill with steady hands.
The time has come where I will have to do this totally on my own.

My question to you owners of the Feickert protractor is what is your experience with it regarding ease of use and accuracy compared to other protractors?

Secondly, the disk has strobe markings for speed set up, does the Feickert package come with a strobe light for the $250. selling price?

I asked these question of a dealer sent via a e-mail and have not received a reply as of yet.

Thank you for your replies.
stiltskin
sirspeedy
738 posts
 
Forgot to mention,for those wanting a nice assortment of magnifying glasses,if you are close to a Barnes and Noble bookstore..."they" have about ten different types on display.Many look to be very good,with two different magnifying strengths(on each model),and a little led light too.The majority are quite small,and very good for this subject matter.
Good luck
dan_ed
2,451 posts
 
BTW, downunder. I think you mis-interpreted what Sunnyboy posted. The fact that the Rega and MintLp protractors use the same Stephenson alignment equations will show roughly the same results. And to quote Sunny:

I should point out that its all to easy to compare the final alignment between the MintLP and the supplied Rega protractor.Could I have achieved the same quality of alignment using ONLY the Rega supplied protractor ? The answer is NO.
palasr
453 posts
 
Downunder,

Nice comparison of the Mint and the Wally.

I will disagree however about the efficacy of Wally's etched groove vs. Yip's fine silk-screened line. I found the Wallytractor etched groove would actually "assist" the stylus into "finding" the etched groove, as it is cut with 45 degree sidewalls -- hence the stylus tip would push or pull ever so slightly on the cantelever/suspension of the cart to somewhat force it into the bottom of the etched groove.

While I never argued with the results I obtained with the Wally, it was always something that bothered me slightly...perhaps his most recent iterations of the tool have addressed this. Good listening,

-Richard
smoffatt
205 posts
 
Sirspeedy, let us know how you do with the complete set up of your Series II using the Graham supplied set up "jig". Do you feel that you still need to use Wally's to ensure you have it "dead on". Please report back. Thanks
downunder
1,328 posts
 
Speedy

That is interesting re the Graham. does it still have the two parallel lines which spread out to the right and left at the top which you align your cantilever to.
Are you saying there is now a dot or line at the end for the stylus( if this makes sense)
maybe I'll get out my magnafine glass again tonight :-)
More to discover