1. Home
  2. analog
  3. 1219241520

I'm taking a poll...

Vote for A, B, or C---

Assuming all other turntable set-up parameters are dialed-in, optimum vinyl playback is achieved when:

A. You set the tonearm at level and leave it there.
B. You use your ears and adjust the VTA incrementally up or down.
C. You get the stylus to ride in the groove at a 2 degree angle forward, to match the assumed angle of the cutting stylus.
will_herrera
consttraveler
250 posts
 
I vote with my ears; B
will_herrera OP
40 posts
 
For Viridian to read:

http://www.audioasylum.com/audio/vinyl/messages/1240.html
narrod
1,064 posts
 
B. Not sure about accuracy of that 2 degree angle statement.
kurt_tank
1,188 posts
 
Viridian, I think Will meant 22 degrees, not 2 degrees.

I typically start with A, (assuming the cartridge itself is parallel with the tonearm), and then move onto B for further a variety of record thicknesses, until I get the sound dialed in to what I like best.

(I don't bother with changing my VTA for different record thicknesses, so I just set it somewhere between the thin and thick records in my collection. I prefer to listen to music, than to play around with the VTA in order to get the nth degree of sonic bless.)

My two cents worth.
viridian's avatar
viridian
4,184 posts
 
Will, your link indicates a cutterhead angle of 22 degrees, not 2 degrees as you stated. Nothing here to change my opinion that you are either testing to see if anyone is really paying attention, or this thread is a total troll.
More to discover