Ortofon Per Windfeld Load Impedance?

Taylor, I have heard this guy and his little btother Jubilee at 100 ohms. If your pre allows the adjustment, and you have a phono cable in the same league as both of these giant killers, keep dropping the impedance.

A good rule of thumb (i.e. place to start) is 25 times the coil resistance of the cartridge. That generally winds up somewhere between 100 - 1000 ohms as most moving coils have an internal resistance between 4 and 40 ohms. Then you can vary it up or down 50% (from the 25 times number) until you get the best results.

I have both the Jubilee and Windfeld here and in 5 different phono stages including Manley Steelhead, Art Audio Vinyl Reference, Atma Sphere MP-1 (phono version), and Oracle Temple the ideal loading should lie between 125 and 175 ohms.

Pay no attention to the first post's obvious lack of experience.

Dealer disclaimer.

Zieman, Would you care to characterize the differences between the Per Windfield and the Jubilee? I've been thinking about one or the other myself. Thanks.