2. analog
  3. 1228927977

Technics SL1200: standard overhang gauge or MintLP

Hello Guys,

Some days ago I started a thread asking the difference from the cartridge setup on a Technics SL1200 with the stock white gauge and the Baerwald points by other Tractors
Well , as I told to Tvad I bought the MintLP Best Tractor and I tried the new overhang position.
Pratically is about 2.5/3.00 mm forward respect the standard white plastic gauge point so theorically the arm is longer with MintLP setup
I'm listening this new setup and I have to say Tvad was right when he said the sonic result is much better with the MintLP setup
Not only there is much less distortion like Tvad wrote .. but there is a large improvment in soundstage more wide depth and heigh more focus
As quality of sound I'm noticeing better bass quantity just tuneful and splendid heights super fine
I strongly suggest Technics SL12xx owners to buy that MintLP Best Tractor and to reset the cartidge position if done with the standard white gauge

Thanks Tvad for your suggestion

Best wishes to EveryOne

Curio
curio
kenyonbm
140 posts
 
Could some one please explain the differences between the MintLP and the Vynilengine protractors?

Is it an ease of use issue or are they basically different?

Thanks, Ken
tvad
9,467 posts
 
The MintLP website explains it well.

The basic physical difference is the MintLPs precision cantilever alignment
method (using the parallax effect), its table/arm specific geometry, and the
MintLPs very detailed instructions.
jsd52756's avatar
jsd52756
345 posts
 
There is a cheaper version from Turntable Basics that uses the same mirror type setup. It works very well and the mirror has many other good uses as well. I got my SL1200 set up great with that version.
Good luck, John
tvad
9,467 posts
 
12-11-08: Jsd52756
There is a cheaper version from Turntable Basics that uses the same mirror type
setup.
I owned the Turntable Basics protractor. It is not
the same, although it does use a mirror, which is more helpful than protractor
printed on card stock.

The results with a MintLP are vastly superior on my table.
dan_ed
2,451 posts
 
There is a cheaper version from Turntable Basics that uses the same mirror type setup.

Read about parallax error. Then read about how the MintLp is made. The TT Basics protractor is certainly cheaper, but it is NOT "the same mirror type setup". And it is much more accurate.

Just a very happy customer here.
More to discover