Audio Desk Vinyl Cleaning System

Jtsamarinda, you have been very stoic. I loved the convenience of the Vinyl Cleaner and wish I could buy a reliable one. Please continue to tell us of your saga.

Jtasmarinda,
you really had a bad experience. I did receive one of the first units (so Series I) at High End 2010 in Munich. It is true we had to change the chip once and also use a different fluid mixture. Since then I have washed over 400 records without any problem.

I do own the Source Odyssee MK V with two brushes as one of the first customers in Germany too and will not give away this wonderful and very precise machine. But those two machines on one`s washing table are a perfect match for all needs- Washing Heaven !

Hi guys, how do you check th serial number of your unit? I want to know if mine is current.

Thanks!

Anybody tried the Moth?

Hi! Vinylfriend, the serial number is at the bottom of the machine written with a marker pen. And if you still got the packing box it's marked on the 2nd box.Mine was a early S/No.4X a friend of mine sold me an later model S/No.4XX which he bought in December 2010.For he was pissed of with the service he had with the manufacture in Germany.Now I am waiting to get an RA# number and I had call Germany many times answering machine and e-mail to Reiner no responces. I could not fix this one S/No:4X as the drive motor which turns the record ceased and blew up the IC power module and part of the PCB.I have written to a US distrubutor and I am waiting for him to send me Return Authorization and he is contacting Germany.To date 4 days ago have not recived any thing yet.My friend who sold me his faulty machine had it repaired in Germany with a turn around of 4 months to get it back.And after he got it back not long it broke down. The following issue on the Audio Desk RCM:Water will not fill the tank area.Record will not spin due to rollers.Record will not spin due to motor drive mechanics jammed.The most common is record would not spin due to rollers.And on the earlier model S/No. if you put a 200gm record its hard on the rollers thus the rollers came a part.Also there is no heat sink on the IC module amplifiers on earlier model. If you have the latest model there are mod which was done by the factory which I had advise the manufacture after I had fix my earlier faults with the machine.
How many of you guy had faults with the system care to share the problems.Any one