Ekobesky - that is really interesting and makes a lot of sense. I had set the tracking force at 1.55 grams and, using the blank record, had set the antiskate at around 1.1, so if you take that times 1.4 you have 1.54 which would imply that the antiskate be set the same as the tracking force. Thank you for passing that on.
Overhang for Ortofon 2M Bronze on Rega RB301
I just purchased an Ortofon 2M Bronze cartridge and am a bit puzzled about the overhang setting. The people I purchased the cartridge from said they set the cartridge so the front of the cartridge is flush with the front of the headshell. When I checked this with the Rega cartridge alignment protractor it shows the cartridge should be roughly 2 millimeters further back in the headshell. I listened both ways and thought the setting where the front of the cartridge was flush with the front of the headshell sounded the best. The other thing I was wondering about was the tracking force; Ortofon advised from 1.4 to 1.7 grams. I initially tried it at 1.5 grams and then 1.7 grams (as recommended by the people I bought the cartridge from). Surprisingly I like it at 1.4 grams. Any thoughts would be appreciated.
- ...
- 46 posts total
- 46 posts total