1. Home
  2. analog
  3. 1238196412

Cartridge Upgrade for NAD 533

Hi Everyone!

Have a Music Hall MMF-9 at home with which I am very happy. It has the Goldring Eroica cartridge and I have it hooked up to a Jolida J9 tube preamp.

Got a used NAD 533 as a second table for work. It is hooked up to a Bellari VP129 which feeds into an Onix Sp-3 integrated tube amp. The arm is the RB250 that comes with Rega tables and the current cartridge is a Grado Black.

Can you suggest a cartridge upgrade that would improve the sound? My speakers are Advent classics (large). I'd be willing to spend about $200.00.

Thanks in advance.
catama
gadfly's avatar
gadfly
194 posts
 
Catama,

I used a glass platter which really made a nice difference.
I wound up using a thick rubber mat with cork dots.

After the mods I had rid the table of the WoW issues it had.
It also had a far better bass presentation and much better impact.

The final best 'mod' was the Ortofon Black.
I had the Red first. Really, the sound was better presented with the Black but I could have lived happily with the Red. The Blue has a nude stylus which is a better choice than the bonded Red.

I am sure you are going to like it.

reference: http://home.comcast.net/~omaille/audio/morgue/NAD533/NAD533.html
amediamonkey
1 posts
 
This thread is quite old, I hope some of you are all still alive and well!

Following the advice above, I have installed an Ortofon 2M Red on my NAD 533. It sounds wonderful, but I have a problem: The Ortofon cartridge is taller than the original, so the arm lifter does not go high enough to lift the stylus clear of the vinyl. I have found instructions on how to disassemble the lifter, mainly they say DON'T!. Does anyone have a trick to fix this before I start experimenting?

Thanks
oros's avatar
oros
39 posts
 
RB 250 arm lift adjustment very small Allan Head bolt holding the lift arm to the shaft.
Slacken it and raise the lift. bit fiddly and Bobs your Uncle.

Or if you cannot find the correct Allan Key stick a rubber strip or some cardboard with some light duty double sided tape on the lift arm as a temporary measure.

It is !.2mm.or 1.25mm Allan key.
More to discover