how long of a break in for 17d3

I was doing a search and found this thread. I am considering purchasing a CAT Ultimate.

I assume it is able to work well with the Dynavector 17D3 and not have too much noise considering the low output of the dyna. Is that correct?

Thanks.

Jim Perry

My opinion about "working well" is probably a bit different. I would
use a cartridge above 0.8mV output with that preamp. It can make life much
easier.

Thanks for the prompt response. I really appreciate it. Right now I am using the Fosgate Signature Phono preamp and there is quite a bit of tube rush when I turn up the volume on my Quad 99 preamp.

Any thoughts on a tube phono preamp that would work great with the Dynavector 17D3?

Lamm LP2 in High Gain Version with 70dB

I find the 17d series to be very detailed and accurate, but never warm or soft, if that is what you are looking for. With some components that already have a bit of an edge, they can tend to sound aggressive. I would have thought the Fosgate might tone that down some, but not so in your case. I am using a SimAudio LP5.3 with PX5.3 power supply which is dead silent even at high volumes, detailed but full sounding. Maybe try a step up transformer to the Fosgate instead of relying on it for the full amplification.