30 ft rca run too long for a phono to preamp?

Alright Gentlemen, lots to think about, the ceiling mount is a possibilty, but it would still be about 45" from each speaker. I will look into the Galibier sandbox, and Audiolui, you may be onto something as I blew the bottoms out of my Vandersteens sunday afternoon.

Thanks, I will post back with my solution.

Mike

Hanaleimike
maybe, just maybe what I did in terms of a wall mount (not grown on my own tree) could work for you too. Have a look at my system.
The tt is jolly close to the speakers going easy to 35Hz and I get no feedback to my pick-up what ever, I promise.

The idea with this is to have a sturdy mount, but VERY little in the way of low frequency 'getting a grip' so to speak on the support.

The idea came for some VERY high-end tt mounted in a system on display some time ago with Image HiFi (high-end German mag.)

The wall needs to be of course VERY solid, as it is in my case e.g. brick and mortar.

Please let me know what you think.
Axel

What table are we talking about and where do you have it currently with respect to your system pictures? Are you thinking of moving that stuffed chair and placing the table there, next to the truss?

Mike what about moving the chair to the right away from the A-frame beam and mounting the support, sandbox and TT on the beam.

Hi Dan, it is a thoren td-147, I currently have it where the c-30 is in the picture as I have upgraded my preamp, but not my systems photos. I am thinking about moving that chair to the right.
Sam, I thought about it, and it would probably be the easiest, but there are 2 ceiling fans across that beam, when I put my hand on the beam I can feel their vibrations, I don't think that would be good, but the vibrations are at a much higher frequency.
I understand there is going to be some trial and error, I am trying to minimize the number of holes I drill into the wood wall. You should see my floor.