1. Home
  2. analog
  3. 1260234494

P1,2,3: the best Rega for the job

Of the P1,P2,and P3-24, can anyone offer any thoughts other than to get the most expensive one that a person can afford? Or is there applications in which each could be the best answer? For instance, I have a Mira 3 and GMA Europas. I want to try vinyl (again - didn't fall in love with the Pro-ject or the Technics) and probably won't amass more than 30 records in the next year (no used stuff 'round these parts). I listen to stuff like Lyle Lovett, Wilco, Feist, Phish, but no classical. Could the P1 be "good enough" to let me give vinyl a chance? Is there really a reason for the P2? I'd be inclined to either save with a P1 or splurge the P3 and call it done, but maybe it represents the elusive happy medium. Or does the P3 outclass the Mira's phonostage? My current thought is to try a P1 with a glass platter and "maybe" put a 2M red on it. But that gets close to the price of a P2 with the Bias installed... which isn't that far, in audiophile dollars, from a P3. Hence my dilemna. Thanks to all for your thoughts and Merry Christmas.
clbone
clbone OP
41 posts
 
And now, the cartridge!

Through a fortunate turn of events, I now have a P3-24 on the way for what it would've cost me to drive the hundred miles to my nearest Rega dealer, pick up a P1, and buy me and my wife a decent meal.

Now...I need a cart. I have an AT 440mla from a previous experiment, but I don't want to install a spacer and this cart is supposed to be really sensitive to VTA. So I'm looking for something that would do good with my fledgling setup skills and no VTA adjustment. LPGear says great things about the Grado Gold on a P3-24, supposedly Grado hum is a thing of the past with the new Rega motors. I'd like to try a Black or maybe a Blue based on all the good and relatively few negative things I've read about Grado carts.

The Ortofon 2M red is another obvious choice but I see as much printed against this cart as for, plus I'm not sure about VTA, though otherwise mounting would appear a no-brainer.

Last is the AT95e which a nice fellow at Music Direct said he wouldn't steer me away from. Nor would the P3-24 review at Stereotimes where Mr. Paul Szabady concluded that it wouldn't make sense to spend more on a cart until the table was properly isolated with a better mat and powered by a TT-PSU.

What would you guys do for a Ben Franklin or less?
Thanks!
learsfool
1,206 posts
 
I would suggest one of Rega's, then you don't have to worry about a spacer, etc. Nothing wrong with the table isolation or felt mat either, assuming you have a good surface for the table and it is level. I have no vibration problems at all with my P5 on top of my audio rack (Sanus). The Exact 2 sounds good on my table, but that is quite a bit more than your stated price range. I have also heard the Elys on a P2, which was nice. I would also highly recommend the TT_PSU.
knownothing
1,298 posts
 
Cartridges below or around $100 for RB301 tonearm.

Denon DL110 high output moving coil

Goldring 1000 series moving magnet, if you can find one in your price range.

Sumiko Pearl moving magnet

Ortofon X1-MC (discontinued - on sale <$100) high output moving coil
tigerwoodkhorns
130 posts
 
FWIW I have a spacer on my Rega P9 with a Shelter 90x. It sounds nice.

Don't be afraid of a spacer. I have used a few different carts on the P9 (Shelter 90x, 901 and Denon DL160) and they were all a good fit with the spacer.
orpheus10
5,988 posts
 
The P3-24 is the best by far.
More to discover