DaVinci tonearm and azymuth

I would add anything Soundscape Hi Fi said with a grain of sald after spending an hour talking to him in the store.

Hi Daniel,
Only 6 degrees below??........that MUST be global warming!
Here in Sydney, after a hot Spring, we are having a cool start to Summer.

Of course Doug and Daniel are correct and perfect azimuth is great to achieve.
I have never had a visual discrepancy of 'several degrees' with the DaVinci and the effect is simply manifested in a 1-1.5 dB attenuation in the right channel of my speaker which I accommodate with the balance control.

Having said that, it may simply be my preamp at fault because the correction seems to suit ALL my cartridges and all my other arms?

In other words.....ignore my previous comments and check your DaVinci as other posters suggest.

Psag,
Another thought occurred to me.
The DaVinci VTA Tower is elevated by a threaded rod operated from the top of the pivot housing.
Once you are happy with the VTA alignment, you must lock the base clamp in and then RETRACT the adjustable threaded rod so that it is no longer bearing on the base plate. In other words, the VTA Tower is held solely by the base clamp and NOT also resting on the elevating rod.
If you still have a problem with the level of the headshell after this, Peter Brem and Jolanda will certainly help you.

Thanks for all your helpful responses. I checked the base and then the headshell with a bubble level, and there is a discrepancy between the two. Halcro, Peter and Jolanda just sent me a helpful email with exactly that suggestion, which I will try tonight.

I agree that on an arm at this cost should be built correctly.

Having the headshell level, though, gives absolutely no assurance of optimum azimuth setting. Getting it properly aligned is a must.