Project Debut III or Technics 1200 MK5?

Hearing aid, you are correct.

The Technics is a better table stock, and it has an upgrade path that the Pro-Ject simply does not. As time and budget allows, you can experience dramatic improvements by doing the following:

1. Add a Herbie's Way mat. Makes a very noticeable difference. Around $70.

2. Substitute a Sumiko HS-12 headshell for the stock shell. About $50. Adds mass to the arm, gives you a more stable and adjustable mount for high-quality cartridges.

3. Add the KAB Fluid Damper. Around $100, I think. Or perhaps change out the arm entirely for a Rega, Jelco or...SME 309!!!

4. Swap the feet or put it on an isolation platform.

5. Rewire the stock arm, if you decide to keep it, and it is good enough.

My SL-1200 makes music. It has the Herbie's Way mat, Sumiko headshell, AT disc stabilizer, KAB fluid damper and a Denon DL-103 cartridge.

I highly recommend the Denon DL-103 cartridge if your phono stage can handle it, but if not, get a Denon DL-110 or DL-160. Over the years, I've found those to be the best bang for the buck in terms of performance and synergy.

Good luck!

I pretty much concur with everything E Kobesky recommended. I consider the Sumiko headshell (also available as LPGear and other brands; actually sourced from Jelco) a must. In addition to the improvements he mentioned, the tonearm wrap I mentioned (Teflon pipe thread tape) will kill the midrange glare and give a more linear, relaxed presentation.

The Denon DL-110/160 carts are a nice match, especially when mounted in a Sumiko/LPGear/Jelco headshell to better match compliance to effective mass. Recent reviews indicate that the Orotofon 2M Blue is also a great match at the same price range. I upgraded my DL-160 to an Audio Technica AT150MLX when they were only $50 more than the DL-160. Now the best price I've seen on the 150 is $299 from LPGear, but it IS a significant upgrade in speed, neutrality, transparency, and inner detail.

I also have the KAB fluid damper. They're $150. I also recommend getting a tube of spindle oil and oiling up the spindle. Some probably leaks out during shipping. I found a slight but noticeable improvement in noise floor and speed smoothness when I oiled mine up.

Technics SL12x0 'tables are ridiculously well built for the money compared to the competition. You only need to update the handling of vibration and resonances to get a very nice table in the bargain.

I agree with Ekobesky and Johnnyb53. If you even want to take it one step further you can upgrade the bearing to a nitride silicone ball bearing in a brass housing.

Technics 1200 easilly surpasses the Projects and rega's. Go to KAB usa site and there is a whole lot you can do and spend to make your 1200 super good sounding.