2. analog
  3. 1266267328

help me remove noise from my vinyl setup

hi all,

i have a low-output vinyl setup, and the noise hovers around -60 dB. i would like it to be lower. can you let me know where the problem might lie and suggest solutions?

i have a Technics SL-1200 (M3D) that i got from KAB, with most of the upgrades... fluid damped tonearm, Cardas tonearm wires, strobe light disabled, and the external power supply/conditioner. i have the low-output Grado Sonata1 (statement series) and Cardas headshell wires. i have Grado's prestige interconnect cables between the turntable and a Grado PH-1 phono stage. finally, i have a Blue Jeans MSA-1 cable between the PH-1 and an ASUS Xonar DX sound card in my computer.

here's a recording of the noise:

http://www.sendspace.com/file/1y89l5

there is also a slight popping/crackling noise, can you hear it?

i borrowed a Furman PL-8 Series II power conditioner from a friend, and tried plugging the PH-1 into that. i also tried plugging the turntable power supply into it. ...it didn't help any.

many thanks.
scar
drewmb1's avatar
drewmb1
57 posts
 
"defeats the purpose of the low output Grado, The low output grado uses less wire in its coils to get the signal out faster and cleaner, why put more wire back into the path of the signal."

Hello Scar,
In my opinion the quote from Grado merely strengthens my opinion of "why would I want to buy a Grado?" I have a Denon DL-103R going through a moving coil phono stage and it didn't put out enough signal to play loud without overdriving my power amp. I brought the amp in for repair because I thought something was wrong with it since the thermal protection kept shuting down. Nothing wrong with the amp. I placed a SUT in front of a good mm phono stage and WOW!! What improved sound. Rather breathtaking actualy. PUNCH, VITALITY, High AND Low level definition. I had to try it since even the late G. Gordon Holt used SUTs at times. I've read MANY a reviewer comment on using them.

Sincerely,
scar OP
10 posts
 
thanks.

can anyone recommend a SUT for my setup? i honestly don't have any experience with them. i'm sure i can pick up a few things by reading various threads around here, but i always appreciate some first-hand recommendation based on my current equipment. i'll need a pair of cables too, probably not longer than 3 feet.

the output of the sonata is 0.5 mV and the Low-gain setting of the PH-1 is 40 dB, suitable for a 1.5-5 mV input (according to the specs).
scar OP
10 posts
 
i am looking through some SUT's around here. i need some clarification on specifications. like load impedance or something.

my cartridge says it has "Imput Load 47K" and "Resistance 2".

i see some SUT's have selection switches, also. "bypass"? "passive"? what are those?

what am i looking for in a SUT that will work in my system?

thanks.
gregm
3,021 posts
 
Scar, the SUT is recommended for its noise-filtering properties -- no?
OTOH, if cartridge & pre are OK, it's either a cable problem, or a grounding problem, -- or simply the area there is very noisy... Strange!
scar OP
10 posts
 
i have heard from someone else that "The Sonata has an output of 47k ohms and any SUT will also add reflected impedance. The Sonata can only be used with a Head Amp. No SUT will work with it."

what should i buy?
More to discover