Milty Zerostat - Questions


I recently purchased a new Milty Zerostat gun, but I don't think it's working properly. I need help answering the following:
- Am I using the Zerostat correctly?
- Do I have a defective unit?
- Is this yet more audiophile BS?

Usage:
I hold the gun about 5" above the spinning record, slowly pulling the trigger (no click). I then point the gun elsewhere when releasing the trigger, and repeat this about 2 or 3 times per side. I can hear a very, very faint burst of air emitted from the gun, but it doesn't sound like very much.

Problem:
I have a box of recently inherited albums, all of which are in good condition, but have a substantial amount of static cling (and dust). After using the Zerostat in the method described above, I have failed to notice any audible difference. There is still a noticeable amount of pops/crackles when I play the records. Additionally, I have found that the dust particles (or paper particles from the inserts) have not loosened either. The record brush just spreads the crap around, so to speak. These records probably need a good cleaning, but shouldn't the Zerostat help... at least a bit?

Testing the Unit:
Included in the packaging is a small 'plastic bit' that you affix to the nozzle. When you pull the trigger, the light bulb inside the plastic bit should glow slightly, if the gun is in proper working order. When I attempt this test, the light bulb glows very, very faintly, if at all, and only for a short period of time (.5 seconds). The light bulb definitely glows when I pull the trigger quickly and hear a click. So, do I have a defective unit? The instructions on the box made it sound as if the test is hit or miss.

Should I be kicking myself for spending $100 on a plastic gun? Any/all help would be greatly appreciated (sorry for the book).
jferreir
Forgot to mention that the instructions said you may have to use the Zerostat several times and at different locations for a heavily charged LP and that the final discharge should be away from the LP. Al (Almarg) mentions this.

Because the two units I tried did not work properly I don't know how effective a single charge and discharge would be in eliminating static.

Tom
The Zerostat doesn't take dirt off, that's for cleaning. It does help change the charge on the record so that when you use a brush right before playing it will remove dust. That works fine.

As said above, pops and cracks in general are not just static, that means the record is dirty, or if new has some bonding agent on it that needs to be removed from the grooves.

That said, there are better static removers but they are usually much more expensive.
In my experience, the Zerostat did not help to loosen dust prior to brushing. Rather, the dust just spread around the record, but remained firmly attached to it. Perhaps I have a defective unit, I do not know.

In case anyone is interested, I think I have found a much more suitable alternative. I just picked up a raincheck for a Sharp PlasmaCluster FPP40CX Ion Air Purifier. From the description, in addition to releasing positive and negative ions into the air, it also has a three part air filtration system, which includes a hepa filter. This has the added bonus of catching/trapping airborne dust/allergens/viruses, removing them from the room altogether. Best part? $150 on sale.

I purchased this unit specifically for my allergies, but I wouldn't be surprised if it has a positive affect on reducing dust/static charge. I guess we'll see, but it's something to think about anyway.
I've been using a Zerostat that I bought at Tower Records about 25 yrs ago to use in my darkroom. I have been using it on my CD's for about 2 yrs now and it works! Following the instructions found at http://zerostat.com/ it works for me. I just visited the Zerostat site and there is an announcement:

Quality Hold:
Because of quality problems in the manufacture of the Zerostat 3, SPI Supplies has suspended sales of this product until further notice. We are reluctant to do this, because we know that this product is important to many of our customers, but the number of product failures has reached an unacceptable level. At this time, there is no firm schedule for us to resume selling this product. Please watch this space for additional information as it becomes available.

So some of you who think your Zerostat is not functioning properly just might be right.

Marvin