What MC for $1,000-$2,000?


Well, call me surprised when my Quatro Signature II woods didn't like my new DENON 103-R. It ate it alive and spit it out like so much wood from a wood chiper.

The bass was decent, with nice punch. But from there it wasn't so good. Weak imaging (on Vandersteen Quatro's!), midrange was cloudy and had no depth at all. Cat Stevens sounded like cardboard. He sings from down in his chest, but the DENON comes across FLAT as AM radio. The highs were depressed in dynamics and extension. No amount of stylus rake angle (some call this VTA, but it isn't) or stylus pressure ETC changed the basic sonic signature. I had a 103D model that sounded good on my Dhalquist DQ-10's with morror imaged KEF tweeter mods and dual DQ-1W subs, so I went with what I thought I knew. I know NOTHING!

I re installed my thirty year old Accuphase AC-2 and WOW, is that a nice cartridge or what, compared to the Denon 103R on Quatros. EVERYTHING just opened up. Bass was tight and lost the too warm sound, the mids were precise and stood in space with tons of air and ambience (strings are stunning). The highes are fast and open. In short, this was a good cart. It seems to have a left channel acting up so I need to consider a replacement. No matter where I set the AC-2, it was simply worlds away from the 103R.

The problem with the Quatro's, is that they are so good at what they do for the price that you seem to really, really, need to spend on a pick-up that can match their abilities. Way more than I expected! The DENON 103R is not a bad cartridge at all, it just limits what the Quatros can do, and the AC-2 let me know that in spades that performance is being left on the table, rats. Sure, it would be nice to change cartridges until I can't hear a change anymore, and KNOW that the speakers are now the limiting source, but I can't do that. Its hard to audition a cartridge at all.

So what are you guys and gals using with high definition speakers? I looked at a Dynavector KARATE 17DS that seems like a possibility. Worse, is that I have no real reference for WHERE the AC-2 stands in general timber to what's out there. It sure is good sounding on the Quatro's, that's for sure. The AC-2 isn't "warm" but past that I'd say it was tight and fast, with an extremely open mid on up. What's available that matches that description?

This can get plenty frustration, as the cartridge is probably, I say definitely, every bit as important as your speakers, but with almost no real way to audution them.

I use;
Sim Audio LP-5.3 MC/MM pre amp
Ariston RD-IIs Turn Table
SME series III tone arm
McCormack DNA-225 amp
McCormack MAP-1 pre amp
Quatro Signature II woods
OPPO BDP-83SE CD unit.
rower30
First, the AC-2 is quite a decent cartridge (and usually costs more used than a 103R does new). Second, pbnaudio pointed out that the 103R may take some settling in (a lot of people say that about that cart).

As to changing your cart until you KNOW the speakers are limiting improvement, if you spent $1000 on a used cartridge which was really great, you might find that other links in the chain before your speakers were limiting things far more than your speakers were.
The problem is your tonearm the SMEiii is a low mass arm for high compliance cartridges - a total mismatch for the Denon. I would strongly recommend upgrading both the arm and cartridge - something like a Rega RB1000 arm plus Shelter 501 would meet your budget and far outway a $2000 cartridge in the SME. Alternately you could go to a high compliance cartridge like a Grado - the more expensive low output versions will have more speed.
add Lyra Argo to your list. IMHO imaging champion on the price range you've mentioned.
>>This can get plenty frustration, as the cartridge is probably, I say definitely, every bit as important as your speakers
Rower30<<

Not a chance.

Actually, the table and/or tonearm are more important than the cartridge.
I agree with Dover - there's probably no point installing a modern high end MC cartridge on that old low-mass SME arm - it wants to see a high compliance cartridge and today's moving coils are primarily medium to low compliance. You need to upgrade the arm - I'd go for a used SME309, Rega or Origin Live arm with whichever Dynavector cartridge then falls into your budget.