A Copernican View of the Turntable System

Dear Chris,

you are right, many footers are lying around here. Maybe need to clear a bit. Which arm do you mean? EMT 997?

Best & Fun Only - Thuchan

Dear Thuchan

I selfishly meant your Eminent Technology arm.

But any other surface mount tonearm would make this very simple and quick to try out.

Chris

thuchan
the screws can be 140mm long. if you counterbore the 5 holes in the bottom to fit the screw heads to a depth of appx 3/8" that will allow 3/8" penetration into the sp10 thread sockets, which is more than enough. c/b the holes to allow for a washer as well, so 3/8 deep x 3/4 to 1" dia. should work fine.
don

Thuchan, I assume you know this, but in case not, thread size is M5. What material(s) are you using to build your plinth?

Dear Ct0517, got it, sorry i did not think of my ET-2 cause this is such a perfect installation on the Naka I will not change it anyway. My plinth at the moment is not designed for a linear tracker and I do have so many other tonearms lying around - also need some clearance now...
of course this could be agood match!!!

Best & Fun Only - Thuchan