Removable headshells 101


Due to the influence of Raul's thread on MM cartridges, I believe that some of us (perhaps for the first time), have acquired a tonearm/s with a removable headshell?
In my case, there was a vacuum of knowledge or information about what makes a good headshell and for the last 6 months a great deal of my time and effort has been expended in acquiring personal hands-on experience.
Perhaps a Forum to share experiences will help new adherents to this once denigrated (by the High End) segment of tonearm design?
128x128halcro
What for heaven's sake is the sence of testing two carts a day? What possible sence is in owing 100 different carts? This whole fuss has nothing to do with music but with some egos who want to be 'super egos'.

What sense is there in watching sports or tv or having a cocktail or any of the other countless activities undertaken by citizens in a pluralistic democracy? Unless one is a devotee of Plato or Aristotle and gazing at the Forms all day, push pins or poetry: whatever (to butcher Bentham).

Perhaps the intention is to achieve super ego status (who really knows?; who cares?), but nevertheless the MM thread and hopefully this one has helped a lot of people acquire information that would be otherwise lost or relegated to the chosen few. Where else am I going to get opinions (for free!) on relatively obscure headshells but through threads such as these? One shouldn't confuse the value of a practice with the value of the original intent (cause).

But you are probably right, Nandric, that all this is but a symptom of the West's decadence and decay. But we knew that already when 100 million votes were cast to pick the winner of American Idol :-).
Nice one Nadric :-)

I was sucked into the MM thread for a while, now I listen the carts I like and all but one of the MM's sit in my cupboard arguing over who might get played next.

I have no idea how someone can make decisions on the full merits of a cartridge after using it for 4 or 5 choice cuts or several days. Then again as I am reminded, I am not as skillful or experienced as some and that is why I have to live with a cartridge for a long period of time to appreciate all its strengths and weaknesses.

cheers
My father used to say that there were three types of people in the world:-
Those who contributed
Those who benefited from that contribution
Those who did neither......the oxygen bandits
Somewhere in Holland a little Dutch man is hyperventilating
In regards to the head shell leads issue, I just did away with them completely.

When I rewired my stock Technics SL-1200 tonearm I drilled out the din connector at end of the tonearm and removed the connector (the black plastic insert)from the Technics headsheel. I then soldered the cartridges clips directly to litz wire fished the wires through the openning in the connectors.

I can still easily remove the headshell, by unclipping the clips, unscrewing the headshell and carefully fishing them through the opennings. Obviously this is a delicate procedure, but with a bit of care it can be done quickly.

As such I get the best of both worlds removable with the least connection points in the signal path.

You can see a photo that shows the end result on my "system" page.

One small precision, the picture that shows the setup is in the Full-Circle system under Benz Glider tab.