Uni-Protractor Set tonearm alignment

Dear Geoch: IMHO Syntax is a marketing manager with a way different knowledge-ignorance level that many of us.

I agree with you and I can add:

Baerwald and Löfgren B approaches differ only in the overhang distance ( that changed the PTS distance with the same EL and offset angle. ), this overhang difference is around 0.4mm that's a lot longer than the Syntax sample/pictures ( as always great photos. ). Both set up geometry approaches are good ones with in theory a little different kind of trade-offs.

Even if everything is " perfect " and the cantilever aligned, re-set of SRA/Azymuth set up, PTS distance, etc, etc. all these we did it in static status when the cartridge stylus hit the LP on playback all we know what happen ( we already discussed in this thread. ) through the imperfect LP medium.

How this Syntax could hear any difference ( if any. ) in quality performance that he can attest was because the cartridge stylus position changed 0.1 mm?, IMHO and with all respect makes no sense other than commercial corruption.

I think that a good product like this protractor does not needs this kind of " help ".

As you said, the protractor makes things more easy and this sole characteristic is important.

Regards and enjoy the music,
Raul.

Syntax a Marketing Manager? - I thought he fights against Marketing?
always learning new insights...

Best & Fun Only - Thuchan

Syntax, I agree with Geoch and Raul.

I do not see the point with your posting.

Anyone with very little skill can position a stylus onto a point, so this kind of misalignment would be rare.
Nobody cares about the dennesen tractor misalignmnet vs correct alignment, unless you are doing a vaild comparison against the Uni Tractor.

After all, this is what the thread is about.

Dear Geoch, you state:

"the skill of the user to follow the offered precision is irrelevant"

what does it mean? As most of us do know and have learned how to align a cart & tonearm combination properly I have seen and heard many times inproper alignments. Having used for many years the Dennessen I know that you need a good time and some patience and also some skills to bring the needle into the hole.

Unfortunately what we are missing in our hobby are learning or training courses on proper alignment. if you don't have a good trainer/coach/friend not only giving you shows or demonstrations (I attended once Mike Fremers demonstration at the High End but this is theory demonstration
only!) and you are not doing it by yourself under supervision using a good tool you will always struggle or feel insecure. Do ask most people out there - not the hardcore guys - how they feel about this.

maybe this is what Synatx tried to demonstrate. 1mm correct or not, if you have the chance to match it exactely why not going for this?

Best & Fun Only - Thuchan

Hi,
these pictures are only an example. I did choose the Dennesen with that "hole" to show, that being not spot on will have sonic differences. That's all.
Me a marketing manager? I am afraid, I have a different profession.
Can't hear a difference with the shown set up?
Well, when you can't or think, there are none, it's time for an upgrade.
I made these pics because I heard the differences.
And I made this thread NOT to support the UNIprotraktor, I made it to show every reader, that even close to the right point (or line or whatever) can have good sonic results, but it can be done better.
The UNIprotraktor will go its own way.