If you do this, remember to have your total capacitance be 570pF or a little more. Otherwise it will sound dull due to a dip under 10,000 Hz. The 15k ohm/570pF total capacitance was the formula I was able to come up with my gear that yields the most accurate frequency response, both measured and with listening. The Ultimate Analogue Test LP was an invaluable resource in knowing what combination of impedance and capacitance to load all my carts.
Audio Technica AT150MLX finally gets some respect
I've been at this audiophile stuff for over 40 years. At this point I'm pretty confident of being able to ignore preconceived notions and evaluate the strengths and weaknesses of a component in my system. Still, once in awhile it's nice to get some validation--a sanity check.
I've been using an Audio Technica AT150MLX MM cartridge for over 3 years. Since getting it I have improved the downstream components and cabling a few times, and each improvement, rather than revealing limitations of the cartridge, has shown it to have a great tonal balance, high resolution at its price point, excellent trackability, low level detail retrieval and excellent dynamics.
Still, when I opened my January 2012 issue of The Abso!ute Sound, I was pleasantly shocked to see that the $449 list AT150MLX had been named Cartridge of the Year! Given that the $5000 Benz LP-MSR and $13,000 Clearaudio Goldfinger were also mentioned on that page, it wasn't that the AT150MLX won in absolute terms, but for performance value.
It's as I suspected from my first listen. If you want to know where the threshold into a high end cartridge is, it's the AT150MLX. I got mine in 2008 when the dollar was strong and these things were going for $250. But even at the currently available $325 they are pretty unbeatable.
Back in the Spring of 2008 I asked the A-goners about what cartridge to move up to from the DL-160. I was considering the AT OC-9 or the Denon 301 II, but a number of A-goners made a compelling case for the AT150MLX. I took them at their word and have never regretted it.
If you want the best out of this cart, you *must* give it a capacitive load between 100 and 200 pF. In fact, my highly adjustable Jolida JD-9A phono stage indicates that the real sweet spot is right around 150 pF.
Anyway, thanks A-goners, and it's also nice to know that when the stylus wears down, I can just send for a replacement plug-in stylus $225.
I've been using an Audio Technica AT150MLX MM cartridge for over 3 years. Since getting it I have improved the downstream components and cabling a few times, and each improvement, rather than revealing limitations of the cartridge, has shown it to have a great tonal balance, high resolution at its price point, excellent trackability, low level detail retrieval and excellent dynamics.
Still, when I opened my January 2012 issue of The Abso!ute Sound, I was pleasantly shocked to see that the $449 list AT150MLX had been named Cartridge of the Year! Given that the $5000 Benz LP-MSR and $13,000 Clearaudio Goldfinger were also mentioned on that page, it wasn't that the AT150MLX won in absolute terms, but for performance value.
It's as I suspected from my first listen. If you want to know where the threshold into a high end cartridge is, it's the AT150MLX. I got mine in 2008 when the dollar was strong and these things were going for $250. But even at the currently available $325 they are pretty unbeatable.
Back in the Spring of 2008 I asked the A-goners about what cartridge to move up to from the DL-160. I was considering the AT OC-9 or the Denon 301 II, but a number of A-goners made a compelling case for the AT150MLX. I took them at their word and have never regretted it.
If you want the best out of this cart, you *must* give it a capacitive load between 100 and 200 pF. In fact, my highly adjustable Jolida JD-9A phono stage indicates that the real sweet spot is right around 150 pF.
Anyway, thanks A-goners, and it's also nice to know that when the stylus wears down, I can just send for a replacement plug-in stylus $225.
- ...
- 36 posts total
- 36 posts total