mono cartridge vs stereo

EBM - what you are saying is absolutist and contrary to what others have written. It seems you can use the Y adaptor approach, but you lose some fidelity. How much, I don't know. But most people don't have the capacity for two tonearms or the ability to quickly swap cartridges.

Do what you like i don't really care!!!

Peter, The way I see it, you would have to use two Y-adapters back to back, as you suggest, to use a stereo preamp to play a mono LP in mono with a stereo cartridge. Such a set-up would put you in about the same place as a "mono" switch on your preamplifier, except you would have the signal-robbing effects of all those connectors in the unamplified phono signal path. That set-up is akin to using a mono cartridge that in reality is a stereo cartridge with the two channels combined to give mono output. This option was discussed at the top of this thread, but I have never encountered any one who tried it. As for me, I learned a lot from Syntax's two long posts. It is his opinion that a true mono cartridge is superior to either of the options I mention here. I cannot argue that, because I have no mono cartridge, but I intend to buy one. I may even buy a Lyra Delos Mono, since Syntax praised it highly. For me, I can only say that flipping the mono switch on my preamp, when playing a mono LP with a stereo cartridge is a very big improvement over listening in stereo to the same LP.

Actually, I was wrong in my post above this one. The two Y-adapters would feed the 2-channel output of the stereo cartridge to the phono stage in parallel. This would alter the impedance relationship between the cartridge and the phono stage that may or may not have negative consequences. When you use the mono switch on your preamplifier, you are combining the channels AFTER RIAA correction and phono stage amplification, which has got to be less harmful. Sorry if I misled anyone.

If you have separate phono and linestages, you could install the Y-adapters between the two components, which would work exactly like a mono switch, more or less.

Lew, thanks. Yes, I'm going to put it b/t my phono preamp and my linestage. I think I'll have BlueJeans Cable make one up for me to try it out. I'm assuming all it takes is making a normal set of cables, opening them up in the middle, soldering the hot wires together and soldering the ground wires together. Pretty simple. Someone should make a high quality adaptor that plugs right into your linestage to offer you a mono input. I guess the other way to do it, if you have a spare RCA input on your linestage, is just to solder a jumper across the two hot contacts on the RCA jacks. I'm wondering if that is all one would need to do. That is, given the ground configuration, if the grounds are all joined together anyhow. I might call VAC and ask them about that. It would be so easy to do with a small piece of wire, and I have the extra input...

Am I getting it right? Thanks, Peter