how do you level a turntable?

I used 'Post It Notes'
Just take a pad of Post It Notes and start peeling off layers... place a few here or there under some feet and after a little fiddling you too can have a level turntable.

If you have a turntable with soft feet, the above methods would be fine. If you have a turntable with hard feet or cones, using soft shims may affect the sound of the table. I use a 3 1/2" thick maple platform under my turntable. To level the platform, I installed brass 1/4"x 20 threaded inserts. Then, I used a short length of threaded brass rod to install Black Diamond Racing footer cones. Each corner can be adjusted very precisely.

I use pennies dimes and nickels

Depending on your stand's legs, but many can have a threaded foot retrofitted. If hollow steel square tubing is used most Ace hdwe stores have adjustable feet that will fit. If there are wood legs they can be drilled and have a metal threaded endcab/footer installed.

hello glenn could you email me directly pianopiggy@comcast.net re. the erato pre? thanks dan