Setting Azimuth

I've eliminated the phono stage during my first test. I had the fozgometer connected to the interconnects directly off the turntable. I even switched to a completely different pair of interconnects and the results were the same. I have not done the reverse channel test yet. I'll do some more troubleshooting and report back.

Oh yes, forgot that you were reading off the tonearm cables. Just out of curiosity, does your system SOUND like there is a channel imbalance in the same direction as indicated by the Foz, when you connect the tonearm to the phono stage? If not, then the Foz is back in the soup.

Stringreen,

I assure you that adjustments on any VPI tonearm are much easier with the Counter-Intuitive. Even reading your post confirms how much easier this device makes setting up the VTF and azimuth compared to all the effort you have to go through without it to get everything dialed in. If you're happy and ok with setting up your tonearm with several different Allen wrenches and trying to maneuver the counterweight so perfectly that it goes only where you want it to go, which to me is just impossible, that's great and more power to you. However, virtually all those who bought the CI agree that it makes adjustments much easier. Those are the people who have tried it both ways, while you haven't and it simply appears you don't like the tool for some reason. Arguing against something easily verifiable such as this device's benefit or lack thereof without first trying it is just silly.

BTW, for your Scoutmaster, you can trade in your JMW9 arm for a Classic from VPI...I traded in mine for a Classic 3. You'll get a really nice kit with a template, drill bits etc. a wonderful improvement!

Lanetim,

That is a path I'm considering going down. Wasn't sure if the arm was upgradable. Now that I know, I may do that. I know they are busy moving to a new warehouse, so I'll ask them about it next week.