2. analog
  3. 1353110162

High quality AC turntable motor

I am looking for a high grade AC motor for my Townshend Elite Rock turntable.
The current motor is specified to run at 110v 250rpm. I reckon that it's got very little torque. I have considered the phillips and the premotec - but they appear to offer no real alternative so far as specs are concerned with what I have.

I have seen a couple of motors on the RS Online website by the likes of Berger, and Crouzet. The Crouzet motor intrigues due to it's high torque rating. my concern is whether or not it is noisy, and vibrates a lot.

Does anyone have experience with these motors? or does anyone have any suitable suggestions?

I intend to try out a few different power supplies on the deck at some point.
lohanimal
roscoeiii's avatar
roscoeiii
1,155 posts
 
Thanks Palasr. Much appreciated.
redglobe
218 posts
 
Hi Palasr, Would Sound-Carrier's motor controller meet the standards that you outline (phase angle, harmonic distortion, and individual phase amplitude)?
lewm
6,770 posts
 
Palasr, You are correct; the Walker MC is likely to be pretty much like the SDS. This is what I was referring to in my previous post "most" current commercial controllers do not actually split the phase of the AC.

I am awaiting delivery, as I mentioned, of Mark's second generation controller. It's a finished product, not a kit.
roscoeiii's avatar
roscoeiii
1,155 posts
 
Lewm, can you let me know how I can potentially obtain one of these second generation controllers? Are they currently available? Feel free to message me if that seems more appropriate than posting publicly.

Googling has yielded little for me in my search for one of these.
redglobe
218 posts
 
Hi Lewm, I also would like to know how to acquire Mark Kelly's second generation AC motor controller.
More to discover