Manitunc; When I put my finger over the hole, with no hoses connected and the unit on and the vac set all the way to the right, the highest suction, I don't feel anything. I even tried cotton threads and no movement from them either. I opened up the vac and its very clean, all the hoses look good, I hear something happening, but no suction. I do have the rubberish spindle cap, do you know if this would use the reflex cap as well? Regards Jack
Sota Star Sapphire suspension question
Hey all; I picked up a beautiful Sota that has all the upgrades I would want. I'm coming from a VPI Scout and setup for the Sota is quite different. It has a ET 2 Arm. I have 2 questions, but if you have any comments please share. Initially I had the rubber feet screwed all the way up "locking" the sub chassis. I figured out I had to let the chassis go free. The arm board/arm side is lighter then the left motor side, is the where I load it up with lead to balance? Also, I tried my Benz SL and no matter what tracking force, the angle/weight are too heavy and distort my needle so I went back to a Dyn 20. Any thoughts on that. Also, I get no vacuum from the vac unit, I looked inside and it's clean but nada. Any thoughts. Thanks in advance. Jack
- ...
- 11 posts total
- 11 posts total