VPI Scout setup after watching Frefmer's video

No I understand you can, but my clumsy fingers keep screwing up the TF every time I mess with the weight. And if I want to make on the fly adjustments quickly without worrying about messing the TF up I figured the CI was going to be the easiest way for me.

We all read what you've posted above Stringreen, thank you for the entertainment.

I've ordered the Mint protractor and the VPI headshell wt. As I understand it my Memorial tonearm was not originally intended for MC carts, and the extra weight is suppose to address that to some degree. However I am still confused about setting up azimuth and tracking force. I've been told on this forum to connect the Lemo connector then set Azimuth and TF. It even says that in the directions if I remember correctly. However I called VPI to double check and I forget the fellows name (I don't think it was mike) and he told me to unplug it and keep it in the board next to the pivot point. I explained that when I did that the TF constantly changed depending on where I placed the connector. He didn't seem concerned about this. Since I'm trying to clear up a little bit of end of lp distortion I would like to make sure I'm setting the table up right from the start. Any thoughts?

I might be wrong, but unplugging the connector makes no sense to me. The VTF and azimuth only matter when you listen to records and you can't listen with the connector unplugged so why would you unplug it as you adjust these parameters?

Also, I've never heard of a tonearm not being "intended" for MC or MM cartridges. A given tonearm might not be suitable for cartridges within certain weight range, but not specifically MC averse.

I only say "intended" because I've read in various posts how the memorial arm does not work well with the lighter MC carts. Maybe "intended"
isn't the best word, but essentially it gets us to the same point - the arm seems to "prefer" the heavier MM carts. At least that's what I have read in several posts. I'm not saying that it's truth or not, but I'm going to try some weight and see what happens.