TAD1000 Blowing Fuse

No changes to the system. Just started out of the blue. Any ideas would be great on where I should start trouble shooting. Thanks.

brinmeliss04-29-2015 3:30am

bdgregory Details Discussions Posts This discussion Message User 1,580 posts 04-29-2015 at 02:03pm Copy Comment URL Report Comment Edit Delete have you tried swapping power tubes? I'm not familiar with that amp, but assume it has a solid state rectifier. Normal troubleshooting would start with the rectifier tube, then go to the power tubes. If you pull the power tubes and power on, and the fuse blows, it's time to take it to a tech. If not, try different power tubes.
czarivey Details Discussions Posts This discussion Message User 4,494 posts 04-29-2015 at 02:27pm Copy Comment URL Report Comment Edit Delete blown power tube blows fuse. load your amp with load resistors instead of speakers and pull all tubes out. Insert tubes one after another till the fuse blows.
brinmeliss OP Details Discussions Posts This discussion Message User 33 posts 04-30-2015 at 01:20am Copy Comment URL Report Comment Edit Delete Thanks for the tips, ill pull the tubes this weekend and put them back one by one, as I don't have a tube tester, and see if I can find the culprit!