Speltz Anti-cable needs break-in period?

I am using...

Almarro A318A MKII amp 18wx2 SET
Almarro M33B Speakers
MIT Shotgun Interconnect (older model)
Blue Circle B62 Power Code
Rega Jupitor CDP

Basically, my speakers are 2x 4" full range drivers, and have pretty weak bass.

And yes I need a pair of 6 ft cables.

Realprober..the cables can only do so much.You may just need a subwoofer for the setup. Also so far the best cables I've come across were 16 awg DIY solid core silver speaker cables. You only need 24 ft..If I were you I would atleast make them 8 ft pairs.This would make the total 32 feet of fine silver wire.

That with maybe 50 ft of 14 awg teflon will run you some where around $50 or $60 tops. I doubt there's a pair of store bought cables even remotely close that can touch them in price verses performance. Infact since this is REAL silver ..you'll have a pair of cables that retail around $1000 if they sold in the store..

Here's a link to get you started Make your own cables. These are easy to make..it won't take you and hour to make up a pair. I wouldn't bother with connectors..just something else in the signal path.You can get the silver wire precut for a couple dollars more.That way no measuring is needed.

Take the money you saved and buy a sealed subwoofer.

Gmood1.

Believe or not, those speakers create frequency range of 35Hz-20KHz due to the double bass reflex enclosures. With proper tunes, they sound truly full range except for the very lowest octave. (at least with my old cables)

I talked to Almarro representives, and they told me a sub doesn't match with these kinda speakers..

Anyway, I will do more research on the silver DIY cables.
Thanks for the recommendation.

Realprober,
Our speakers have similar specs, and going to a heavier gauge cable made a huge difference. Interconnects as well. We just changed our IC's and speaker cables, and even our 4W SET amps are driving hard enough now that we sold our sub. I hope that helps.
Regards,
Howard