Purist or Kubala-which to buy for entire system


I am finally pretty darn happy with my system. It consists of Epiphany 12/12 speakers, modded Dodd 120's, and APL 3910, with latest Sound Applications Linestage. I have lots more eq, but, I am trying to simplify. I may end up using a Pre-amp, but I am not sure yet. I do have Dodd Reference Modded, and Modwright modded. Now, my quandry lays here. I am presently using Xindak gold 3 meter interconnects(1 amp on each stand, 8 feet apart). Speaker cable I am using bested Virtual Dynamic Revelation in my system, it is no name, as of yet, but the wire is used to seal Nuclear waste, and sounds amazing. My power cords are Purist Dominus on Sound Applications, Electragide Ultra Khan RR on APL, and stock on my amps.

I have an opportunity to get "a deal" on the latest Kubala Sosna Emotion, and/or Purist line of cables. For the price I can get it for, I cannot audition.

I would also appreciate opinions on whether I should put my amps together, and get longer speaker wire, or longer interconnects.

I have been told by Rick Schultz(VD)and others that the only real way to get the BEST synergy is using same brand cable thu-out system. I just dunno, and in commiting well over 5K to cables alone....I would like some assistance.

Thanks in advance, and best of luck in your journey

Steve
711smilin
Steve: I too have wanted to hear the SoundApplication PLCs after reading one great thing after another about these. I went out on a limb with the Audio Magic based on a lot of reading of PLCs and a recommendation by a local audiophile, Artg. When I dropped it in the system, it was phenomenol across the board. Other units like the SA, IsoClean, etc., may take the system further, but for now, what the AM has done impresses me greatly enough to be content in the PLC dept.

I am pretty sure I sent a response to another A'gon member on the differences between the Dominus B and C PCs. But it looks like that email has long since been deleted. And I do not remember the exact details so I will not even try to guess which cable rendered what sonic attribute compared to the other. I will borrow another pair of Dominus B PCs soon to try on the SoundLab A1 speakers. Before I try this, I will play the B vs. C game on the front-end again and report on this then if you are interested. Keep in mind, the Dominus B fluid cables are no longer in production.

Sirspeedy: Thanks for the support. I ramble on a lot on A'gon and have tried to do this less and less but when I saw this thread I wanted to share all that I had gone through with these two lines. Hopefully JD will see this and chime in as he would be able to provide much value to how these two chalk up to each other.

Rgs: I can fully agree with your sonic report. The CAT amps have loads and loads of energy on the top so this is perhaps why the Dominus B IC locked in so well. The K-S Emotion was not at all forward or bright here, and in fact was also wonderful. I simply loved that added weight of the initial piano note with the Dominus besides the explosive dynamic contrasts. A bit colored indeed, but oh so nice. 8-)

As for syrupy sound, this was exactly the word I used to describe the AA speaker cables when I returned them to the dealer. No other speaker cables I auditioned ever had such a fatiguing midrange hump like these. But in a system even "hotter" than mine, they too might just lock in.

John
At this point I WAS considering replacing my Graham IC-70 phono cable with the Venustas.My friend did,but having been at that listening session/comparison,I still have reservations about the Venustas,in areas of High Freq air,and slight loss of dynamics (slight)and darkening of sound.Overall quite good,and benefits HIS system,but in my set-up,I'd die if I lost air,or darkened up my sound.I fired off an E-mail to Kubala,regarding possibly a new Phono cable,but don't know if they make one,in the two top models,or if costs are prohibitive!Also,what are the metals employed?

Thanks!You guys are a pleasure to correspond with!!!
Yes, cost was not a factor. As a matter of fact, the PADs on the used market at the time were less than the KS's, which were not available used. Thanks.
Sirspeedy: Kubala-Sosna cables do not come in a "phono" or "tonearm" design. When Joe Kubala visited my home last year, I asked this question and he told me his RCA cables would work just fine for this application. And since my Clearaudio tonearm has RCA connectors, it was easy for me to try out the K-S Emotion RCA cables. Did they work here? OH YES! No noise, no hum, no radio-station pickup, etc. The same thing goes for using regular Venustas and Dominus RCA-RCA cables into the Io phono stage. Works mighty fine!
John