Altec A7 What to do


Hello all, a Friend of mine has had Altec Lansing A7's sitting in his basement for several years, just couldn't put them in his current room setting. Many may know that I've been building for about 35 years. I built him a set of MTM's and delivered them for Christmas. He was thrilled. Well, today, he dropped off a pair of A7's and said they're yours. I sat them up and listened, thoroughly looked them over, looked up crossover design (500hz model) and now need to decide what to do with them. I have a decent size living room, but these are still huge. They do a lot of things right, but just aren't as refined as my current speakers. So, I've decided to sell them. I'm in no hurry to do so, but I know that I won't keep these forever. So, are these more desirable to sell as is... stock, upgrade parts in the crossover and sell them, redesign and trick out the crossover, cleanup, sand, minor fill and painting cabinets or some combination of the above. I have no doubt that a complete crossover redo, a bit of cabinet bracing and a good refinish and these babies would be incredible. The problem is... will people that don't know me accept or trust just how good they are? That being the case I'm looking for some advice. Please tell me how you would handle it in my shoes. Tim
timlub
FYI any deviations from stock decrease the collectors value still wonderful loudspeakers I would keep them maybe look for 288 drivers 1050 horn 515b woofer for upgrades
Thanks John, I have 416A, not sure of the horn driver, but the horn is a 511b... Have you done any work on these? I'm wondering if anyone has done impedance correction on both drivers and resonance compensation on the tweeter. I could easily do this and keep the original crossovers in place. I'm thinking it would be very audible.
Altec A7s are plentiful and very few haven't had some work done on them at some point in time. If I had your skills and knowledge, I'd trick them out to the max and then demo them at an audio show. The goal would be to become THE go to Altec A7 mod guy. Like I said, big Altecs are readily available and I imagine that with first rate mods they will do things that $20-30k loudspeakers can't.
Not that this helps although I found it interesting. I just did a quick search "Altec A-7 Modification" and found an article titled "Legend Reborn", and it turns out that Altec has Reissued the A7' a couple years ago. At the time of this article (at least) they are priced at $8600 pr. shipped.
Many years ago a very good friend's older brother had a pair for his home stereo.
I was a fan ever since:)
Thanks to all of you guys. I have just opened the back for the first time. The tweeters impedance is not marked, but DC resistance is 8.1 ohms. The woofer is an 16 ohm 416A...
The Crossover is an N500G. I can do little to the crossover, everything inside is covered in some sort of goo, at first I thought it was epoxy, but it isn't that tough. Caps look to be film & foil low voltage parts, then there is 1 - 2mfd mylar...
I'm going to go ahead and put 400v poly props in place of the film & foils and 1mfd poly & 1mfd styrene in place of the 2mfd mylar, put some high grade wiring in and start there. I appreciate you guys. Tim