PC Recommendation for Furman Conditioner


Hello. I have a Furman SPR-20i voltage regulator/conditioner and require a 20A IEC connector for my power cord.

I'm wondering if anyone can provide any recommendations on a PC to use. I have a VH Flavour 4 I'm currently using and could replace the 15A IEC with a 20A IEC as well instead of getting a new complete cord, (any recommendations on a good 20A IEC).

Also, I've been using a fair bit of stealth cables in my system and like how they present detail and neutrality in a laid back manner so I have been considering a Stealth PC, (never had one).

Also considering in no order....

Lessloss
Kaplan
DCCA
Tel-Wire (don't think they have a 20A IEC option though)

With the Lessloss I've heard some people don't think it's a good cable for a power conditioner, (although others say it is). I like the fact that it has high quality connectors though. With the Kaplan, it looks like the 20A IEC is only a 10 dollar part and while that may not make it bad, some feel the connectors are the most important part, (more so than the cable), but some feel it's close to a Kubala Sosna Emotion in terms of sound quality, (the only important measure).

Anyway, as you can see, lots of options and I know the "you'll never know, cables are so system dependent, etc" feeling. I'm just looking for opinions/thoughts. Thanks in advance.
bhoage
Thanks for getting that information Aslan1. That Kaplan cable sounds really appealing. I wonder if using the filtered Kaplan from a power conditioner to an amp is a good thing or a bad thing? I'm thinking I might want to try a 15A one on my amp and I wonder if the double filtering so to speak might be a bit much and if the unfiltered would be a better fit?

Hopefully someone with some "ears on" Kaplan experience will chime in and answer some of your questions. Thanks

Bryan
Bryan,
I don't know if a line conditioner in line with a line conditioner is a good idea but I will do a comparison and share my findings when Tweekgeek gets more cords in-stock.
Interestingly I got an email from Mike today. He asked that I not quote him verbatim but basically here is what he had to say:

"Hello Aslan,

I think I need to clarify a few things.

The Kaplan cables are not as good, not even close, to an all Synergistic system. However they are better than the Audience.

When you start mixing and matching different cable brands, things get very complicated, and that's when auditioning cables for yourself is really necessary. That is what I meant when I said:

"When you are using only one or two Synergistic cables in your system, its really hard to predict how they will stack up."

I have compared and all Kaplan system (power cords anyhow) to an all Synergistic system (completely cabled), and an all Audience system (completely cabled). Synergistic was the best by a wide margin, followed by Kaplan, then Audience.

I can send you Some Synergistic and Kaplan cables when you are ready. I would encourage you to evaluate them in your own system."

Mike asked that I not post the whole email so I have only incuded the basic gist. Anyway this should be a good shoot out.
Excellent. Thanks again Aslan, I'm really curious to hear your findings. Please loop back to this thread to post your impressions if you remember, once you've had a chance to do the shoot-out.

Bryan
Someone had emailed me asking what cables I used and in what places I had used them. Here they are.

I have a modified Slm devices Transporter, a Modwright 36.5 preamp, and a Levinson No. 35 amp. The interconnects were Syngergistic Apex from the source to pre, and Synergistic Precision Reference from the preamp to the amp. The speaker cables were Synergistic Apex. Those remained the same throughout the comparison since all we were talking about were power cords.

Audience
- Power Chords on the source, preamp and amp.
- AR1P single outlet conditioner. One for source and one for the amp

Kaplan
- 3 amp conditioned cord on the source
- 15 amp conditioned cord on the amp
- non conditioned cord on the preamp

I also used another 15 amp conditioned cord on the preamp. I did not have another 3 amp cord to use on the preamp.

Synergistic
- Hologram D on the source
- T2 on the preamp
- T3 on the amplifier
- Tesla Power Cell
Should anyone be surprised that $7,000+ of Synergistic power cords and conditioning was much preferred to $1,550 of KaplanCable power cords and conditioning?
I'm certainly not.
Nor am I surprised that that same KaplanCable complement of cords and conditioners was preferrable to $2,000+ in Audience kit.

FWIW,
Paul
KaplanCable