Thanks Al for the comments. Let me further clarify two points.
If you think 6dB attenuation is not enough, a higher level of attenuation will actually lower the 3dB freq. A higher level of attenuation means that you will have a larger R value in series with the output. So at a lower sound volume, the highs will be rolled off even more and yields a narrower bandwidth!
The 2nd point is that my power amp needs 4V RMS to achieve full power, 100W/8ohm. The preamp has 12dB of gain. Most CD players have max outputs between 1V-2V. So the 6dB setting assumption is quite appropriate for my setup. I usually set the volume control knob anywhere between 10 to 3 o'clock, and I don't listen very loud....
Mathematics R us! lol...
If you think 6dB attenuation is not enough, a higher level of attenuation will actually lower the 3dB freq. A higher level of attenuation means that you will have a larger R value in series with the output. So at a lower sound volume, the highs will be rolled off even more and yields a narrower bandwidth!
The 2nd point is that my power amp needs 4V RMS to achieve full power, 100W/8ohm. The preamp has 12dB of gain. Most CD players have max outputs between 1V-2V. So the 6dB setting assumption is quite appropriate for my setup. I usually set the volume control knob anywhere between 10 to 3 o'clock, and I don't listen very loud....
Mathematics R us! lol...