Power Strip Question - PLEASE HELP


I need to power my audio system and various electronics from a single duplex outlet. Although this is less than ideal, I need some advice on how to avoid degrading sound quality.

Essentially, I want to buy 2 power strips for the duplex outlet. The first will be used exclusively for my audio system, while the second will be used exclusively for other electronics. Here is the breakdown:

1) Wiremold L10320 Power Strip (9 outlets, 6 foot cord):
- Naim Nait 5i-2 integrated amplifier
- Naim Nait 5i-2 cd player
- Pro-Ject Tube Box II phono pre-amplifier
- Pro-Ject Debut II TT (weak link, I know)

2) XYZ Power Strip:
- Alarm clock
- Phone charger
- External HD
- Laptop computer

My main concern is with the second power strip. I'm worried that these common electronics, being powered on the same line, might degrade the sound quality of my audio system.

Is there any way to limit the interference of these electronics, thus preserving sound quality? For instance, would a power strip with a surge protector limit the interference that these electronics may produce?

If possible, I would like some recommendations for power strips from Allied Electronics, since I will be buying the Wiremold from them (http://www.alliedelec.com/).

I don't have any strict requirements, but I would prefer an inexpensive unit (<$10, if possible) with a short cord.

Thank you so much for the help!
jferreir
I recently had a similar problem. My system is on a dedicated line. I was running non-audio gear--TV, DVD player and equipment lamp--from a separate socket on a separate line. This stuff plugged into a switched mass-market power strip. The power strip's cord was back of my rack, running past my audio AC cabling. When I unplugged the strip, the music sounded clearer and livelier.

I had to find a way to keep the ancillary gear's power bar from affecting my audio. What I did was use some leftover parts to make up an outlet box. I used Belden 12-gauge shielded cable, about $20 worth, a $10 hospital-grade Leviton outlet and a metal outlet box.

Maybe a plastic box would be better, but the plugged-or-unplugged sound test, using this box, shows no appreciable difference. My conclusion is that it is the shielding on the cable to the box that really makes the difference. An unshielded AC cable running past my audio gear's power cords has an audible effect. This is true even if I run the wires so they all cross at right angles.

Jferreir, if you were nearby I could lend you this wonder wire and you could try it out. You could run an extension cord to a separate outlet for this if you wanted, but it might not make much difference if the separate outlet weren't on a separate circuit. Anyway the point is moot because you're probably not nearby. I'm in Montreal myself.

So my point is that shielded wire to the outlet is a Good Thing, and you can do it within your budget.

I have one more point. A shielded wire to your outlet strip will keep interference downstream of the socket to a minimum. However If you want to keep ancillary gear on the same outlet as your music system from affecting your audio by feeding grunge back into the *upstream* AC, you need to isolate something. Either the audio gear or the ancillary gear.

The ancillary gear isn't picky about isolation quality and it doesn't draw much power, so given your budget I would isolate that. You should be able to find an isolation transformer ( 120V in, 120V out ) rated at about 500 VA on eBay at a price that keeps the whole project within budget. Plug the tranny into the wall, plug your new power bar into that and I think you will solve the problem.

Note that isolating the audio gear would do the same thing and it would very probably improve the system's sound a lot into the bargain. However you'd need a really big transformer, more than your budget allows at this point.
1) If the non-audio electronics are plugged into a separate power strip, but are not operational (i.e. off), will they still cause interference and degrade the sound quality of my system?

2) If I use an extension cord running from a different duplex outlet to power my non-audio electronics, will this resolve the issue?

The answers are yes, and possibly.

Have you evaluated all the elements that are on the same circuit as the outlet you are using? It's easy to test. Just turn of the breaker switch that controls that outlet and see how many other outlets and light switches are affected. If other outlets are affected whatever is plugged into those outlets could cause noise pollution on the circuit. Ditto if there are dimmer or high noise light switches controlled by this circuit.

If you do the extension cord tweak, and it seems to be your best option as far as I can tell based on your budget, you need to make sure you select an outlet that is as isolated as possible. In my scenario I have my gear plugged into two outlets on the same circuit, none of which has any light switches controlled by it and the unused outlets on the circuit have nothing plugged into them.
Here is an interesting link to someone knowledgeable about the extension cord tweak. Outside of building your own cord, you may want to look into this further:

http://forum.audiogon.com/cgi-bin/fr.pl?fcabl&1242899532&openflup&38&4#38
Honest1 - missed the OP's later post about temporary housing and landlord restrictions.
Jferreir - My thought was to leave one duplex receptacle available for your amp (i.e., plug it directly into wall). Plugging a strip for non-audio devices into the H-10 would take advantage of any isolation the H-10 provided.
Dlcockrum is right. You need a conditioner with duplexes which are separate from each other. A perfect choice would be a PS Audio Quintet. Plug your components into each separate power duplex. Plug your non audio stuff into a power strip and plug that into the other wall socket. Also, please don't dismiss conditioners out of hand. The PS Audio one is excellent as are others. Experiment! You can achieve a cost effective solution!