SR PC recommendations for QLS-9

T2 is a source cable and not to be used to power a whole system. Try a T3 or T3 UHC if you want a very musical presentation. A Precision AC if you are using upper end Tesla cable in your system or if you want ultra clear and forward presentation.

I think a T3 would work perfect for you. Have fun and let us know the result.

Happy Holidays!

Joey,

It's not powering the entire system.. just the CD and pre and a couple of MPCs.. nothing remotely high current there.

The amp remains plugged straight to the wall.

What power cords are on your CDP and Pre? If you are using T2's adding another T2 will make the system lighter and airier sounding. I recommend a T3 for more weight, musical warmth and it is much more extended than the T2 at both frequency extremes. Plus its heavier gauge will make sure everything plugged into the QLS gets un-restricted power.

Thanks Joey,

Ted responded in the original tesla thread with the same recommendation. He said if I'm just powering MPCs then use a T2 but otherwise use a T3 or Precision.

Right now I don't have any SR PCs. Everything still has a Cardas Golden on it (I previously had all cardas cables). I plan to swap them all the T2/T3 cables for now as I can't afford holograms/precision.

Going to snag demo's of the T3 and precision and probably end up with a T3 unless the precision is just too good to pass up.

T3 on the way :)